How to dock and undock the Venue 11 Pro on the Dell Tablet Dock
Summary: Refer to the information on how to dock and undock the Venue 11 Pro on the Dell Tablet Dock.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Docking your Venue 11 Pro tablet on the Dell Tablet Dock
To dock your Venue 11 Pro tablet using the 40-pin connector on the Dell Tablet Dock, align the tablet in the landscape orientation, then gently slide the tablet on to the connector.
Once connected, ease the tablet back against the backrest if not already against the backrest.
NOTE: The dock connector has a limited 27 degree swivel from the 117 degree position resting against the support to a vertical 90 degree position. Rocking the tablet forward of 90 degrees may damage the 40-pin connector.
Undocking the Venue 11 Pro from the Dell Tablet Dock
To undock, simply lift the tablet straight up off of the dock. The connector is hinged to allow you to tilt it forward up 27 degrees to an upright vertical position.
NOTE: Tilting the tablet forward past vertical before removing it from the dock may damage the docking connector of the dock.
Affected Products
Venue 5130 Pro (32Bit), Venue 5130 Pro (64Bit), Venue 7130 Pro/7139 ProArticle Properties
Article Number: 000119327
Article Type: How To
Last Modified: 23 Jan 2024
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.