Connectrix MDS Series: How to Collect Core files From the Cisco MDS Switches
Summary: This article explains how to collect core files generated on the Cisco MDS switches using FTP and TFTP.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Below is the syntax for collecting the Core Files:
In the above output, 1 is the Slot # which is under Module and 3882 is the PID #.
# copy core://<slot #>/<PID> ftp://<FTP IP addr>/<directory>/<filename>
Example:
`show cores` Module Instance Process-name PID Date(Year-Month-Day Time) ------ -------- --------------- -------- ------------------------- 1 1 flogi 3882 2023-02-14 11:04:08
In the above output, 1 is the Slot # which is under Module and 3882 is the PID #.
#copy core://1/3882 ftp://x.x.x.x/<Folder_if_any>filename Or #copy core://1/3882 tftp://x.x.x.x/<Folder_if_any>filename
Additional Information
Affected Products
Connectrix MDS-Series HardwareArticle Properties
Article Number: 000210075
Article Type: How To
Last Modified: 03 May 2023
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.