PowerProtect Cyber Recovery：錯誤 - 「提供給多連結化物件的儲存介面名稱無效」
Summary: 在 Multilink 新增介面時發生錯誤，指出物件無效。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
客戶在嘗試設定多重連結時收到此錯誤。
ERROR: Failed to modify application: The storage interface name vethx.xxx provided for multilink object with storage ID xxxxx is not valid.
Cause
問題是存放庫 Data Domain 上的介面數量限制超過 20 所導致。
Resolution
Dd。。/network/interfaces REST 應用程式發展介面預設為僅傳回 20 個介面，這已在 CR 版本 19.13.0.3 中擴充至 100。
必須遵循多連結組態先決條件的版本資訊/安裝指南，以避免進一步的問題。
Affected Products
Cyber Recovery Series, CyberSenseArticle Properties
Article Number: 000214836
Article Type: Solution
Last Modified: 16 تشرين الأول 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.