DLMF: Dialhome received with error: DLmV0198E: Get SEL Info command failed
Shrnutí: dial home received with error DLMF-DLmV0198E-Get-SEL-Info-command-failed on VTE1
Tento článek se vztahuje na
Tento článek se nevztahuje na
Tento článek není vázán na žádný konkrétní produkt.
V tomto článku nejsou uvedeny všechny verze produktu.
Příznaky
Dial home received with error message:
LMF-DLmV0198E-Get-SEL-Info-command-failed
This is seen at DLm Release 5.0.3 through 5.1.1, but may affect more versions.
Check /var/log/messages on that VTE:
vte1:/var/log # cat /var/log/messages | grep "Get SEL"
2020-05-07T15:22:51.616010-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:16.630471-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:41.642472-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:06.654503-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:18.674316-04:00 vte1 ipmievd: Get SEL Info command failed: Unspecified error
2020-05-07T15:24:28.674396-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:38.674516-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:48.674616-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:58.674727-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:08.674831-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:18.674939-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:28.675063-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:38.675167-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
vte1:/var/log #
2020-05-07T15:22:51.616010-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:16.630471-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:23:41.642472-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:06.654503-04:00 vte1 ipmievd: Get SEL Info command failed
2020-05-07T15:24:18.674316-04:00 vte1 ipmievd: Get SEL Info command failed: Unspecified error
2020-05-07T15:24:28.674396-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:38.674516-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:48.674616-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:24:58.674727-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:08.674831-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:18.674939-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:28.675063-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
2020-05-07T15:25:38.675167-04:00 vte1 ipmievd: Get SEL Info command failed: Node busy
vte1:/var/log #
Příčina
Failure to disconnect virtual media during after the manufacturing process.
Řešení
In the cases examined, the issue occurred and stopped within seconds and did not repeat the same day. Further checking confirmed it did not repeat within the next 7 days.
Workaround:
Check if VTE iDRAC has Virtual Media attached on the VTE where the ipmievd error occurred by running the below command:
# racadm get idrac.Virtualmedia.attached
Examples:
If Virtual Media is *not* attached:
A workaround (non disruptive iDRAC internal settings modification only) to prevent further occurrence, is to detach Virtual Media. Execute the following on the VTE with the error:
Workaround:
Check if VTE iDRAC has Virtual Media attached on the VTE where the ipmievd error occurred by running the below command:
# racadm get idrac.Virtualmedia.attached
Examples:
If Virtual Media is attached:
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Attached
If Virtual Media is *not* attached:
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=AutoAttach OR Attached=Detached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=AutoAttach OR Attached=Detached
A workaround (non disruptive iDRAC internal settings modification only) to prevent further occurrence, is to detach Virtual Media. Execute the following on the VTE with the error:
vte1:~ # racadm set idrac.Virtualmedia.attached 0
[Key=idrac.Embedded.1#VirtualMedia.1]
Object value modified successfully
Verify:o
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Detached
[Key=idrac.Embedded.1#VirtualMedia.1]
Object value modified successfully
Verify:o
vte1:~ # racadm get idrac.Virtualmedia.attached
[Key=idrac.Embedded.1#VirtualMedia.1]
Attached=Detached
Dotčené produkty
Disk Library for mainframeProdukty
Disk Library for mainframe, Disk Library for mainframe DLm8500, Disk Library for mainframe SoftwareVlastnosti článku
Číslo článku: 000173590
Typ článku: Solution
Poslední úprava: 20 Nov 2020
Verze: 2
Najděte odpovědi na své otázky od ostatních uživatelů společnosti Dell
Služby podpory
Zkontrolujte, zda se na vaše zařízení vztahují služby podpory.