VxRail：如何在 vSphere UI 中没有选项时设置重新同步限制
Summary: 如何从命令行禁用或更改重新同步限制。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
如果在升级到已删除重新同步限制的版本之前设置了重新同步限制，则仍会配置该设置。UI 中不再有任何选项。
此设置取一个介于 0 到 512 之间的整数。设置 DomCompResyncThrottle 重定向到 0 禁用重新同步限制。
1.通过在 ESXi Shell 中运行以下命令来禁用带宽限制：
$ esxcfg-advcfg -s 0 /VSAN/DomCompResyncThrottle Value of DomCompResyncThrottle is 0
2.通过运行以下命令验证您的更改：
$ esxcfg-advcfg -g /VSAN/DomCompResyncThrottle
Value of DomCompResyncThrottle is 03.如何获取有关重新同步工作负载最繁重的磁盘组的 vSAN 重新同步带宽（以 Mbps 为单位）的信息：
$ esxcli vsan resync bandwidth get Rate: 7 Mbps
Additional Information
Affected Products
VxRail Appliance Family, VxRail Appliance Series, VxRail SoftwareArticle Properties
Article Number: 000196091
Article Type: How To
Last Modified: 04 Dec 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.