Connectrix Cisco: "Alerta de seguridad: SRVNAME_RTD_MONITOR-2-SECURITY_ALERT: PRECAUCIÓN DE SEGURIDAD: ASLR ENTROPY INSUFFICIENT" recibido en el registro de registro

Summary: Esta alerta de seguridad se observa periódicamente en el resultado de show logging debido a que la comprobación de aleatorización de la memoria falló.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Error en show logging log:
"%SRVNAME_RTD_MONITOR-2-SECURITY_ALERT: SECURITY-WARNING: ASLR ENTROPY INSUFFICIENT "  

 

Cause

  • El mensaje anterior indica que falló una comprobación periódica de aleatorización de memoria.
  • Cuando estas comprobaciones fallan, no hay impacto en el tráfico de producción.
  • Si este mensaje aparece solo una vez, se puede ignorar de forma segura.
  • Si hay un comportamiento repetitivo, este cambio requiere atención.

Resolution

1. Compruebe el resultado del comando:
show security system state
Ejemplo: 
MDS9710-s1fA-sw1# show security system state
  XSPACE:
        Non-Executable stack    : Yes
        Non-Executable heap     : Yes
        Non-Writable text       : Yes
  ASLR:
        randomize_va_space      : 2 (Enabled)
        Randomization Self-test : Pass
        CVE-offset2lib Test     : Pass
        Randomization Entropy   : 8-19
            stack bits  : 19    heap bits       : 13
            text bits   : 8     bss bits        : 8
            data bits   : 8     anon map bits   : 9
            thread stack bits   : 9
  OSC:
        Version:                3.0.0
  SafeC:
        Version:                3.0.1a

2. Toma nota del rango de Entropía. 
3. Cualquier rango entre 8 y 19 se considera "bueno" y se puede ignorar.
4. Cualquier rango inferior a 8 es incorrecto y debe involucrar al TAC de Cisco para verificar el switch.

Affected Products

Connectrix MDS-Series Firmware, Connectrix MDS-Series Hardware
Article Properties
Article Number: 000212067
Article Type: Solution
Last Modified: 30 May 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.