Connectrix Brocade 命令以相反順序從記事本複製到交換器
Summary: 從記事本複製的命令以相反的順序切換到交換器。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
嘗試透過將命令貼入 CLI 來建立區域或裝置別名時，命令會以相反的順序貼上。
範例：
- 命令：
zonecreate “NEW_HBA1_PowerMax”, “NEW_HBA1;PowerMax” - 顛倒順序：
NEW_HBA1; PowerMax_HBA1_PowerMaxzonecreate
Cause
這可能是由於使用了不正確的雙引號造成的，可能是由於鍵盤語言設置。
如上例所示，兩者之間 “ ” and " "
Resolution
請確定使用正確的雙引號 （“ ”）。
範例：
zonecreate "NEW_HBA1_PowerMax", "NEW_HBA1; PowerMax"
Affected Products
BrocadeArticle Properties
Article Number: 000228869
Article Type: Solution
Last Modified: 29 Oct 2024
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.