Connectrix Brocade 以相反的顺序从记事本复制到交换机的命令
Summary: 从记事本复制的命令以相反的顺序进行切换。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
当尝试通过将命令粘贴到 CLI 中创建分区或设备别名时，命令将以相反的顺序粘贴。
示例：
- 命令：
zonecreate “NEW_HBA1_PowerMax”, “NEW_HBA1;PowerMax” - 反向顺序：
NEW_HBA1; PowerMax_HBA1_PowerMaxzonecreate
Cause
这是由于使用了不正确的双引号导致的，可能是键盘语言设置造成的。
如上面的示例所示，两者之间存在差异 “ ” and " "
Resolution
确保使用正确的双引号 （“ ”）。
示例：
zonecreate "NEW_HBA1_PowerMax", "NEW_HBA1; PowerMax"
Affected Products
BrocadeArticle Properties
Article Number: 000228869
Article Type: Solution
Last Modified: 29 Oct 2024
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.