Cloudboost：如何調整平均區塊大小

Summary: CloudBoost 2.2.2 新增隱藏的 avgchunksize 命令，讓管理員透過「avgchunksize show」或「avgchunksize change SIZE」來檢視或變更平均區塊大小 （最多 1 MB），這會重新開機系統。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

隨著發佈 CloudBoost 2.2.2，您現在可以更改 CloudBoost 使用命令 avgchunksize。

  • 語法：  
avgchunksize <show|change SIZE>
  • 若要顯示目前的平均區塊大小，請使用 avgchunksize show.
    範例：  
admin@mag-fs> avgchunksize show
  • 目前平均區塊大小：256 KB
  • 若要變更目前的平均區塊大小，請使用 avgchunksize change #，其中 # 是以 KB 為單位的大小。  
    範例： 
admin@mag-fs> avgchunksize change 1024
This command will restart the appliance! Are you sure?
To CONTINUE please type "Yes"
Yes

The system is going down for reboot NOW!
100% done. Status: Changed averageChunkSize from 256 to 1024 KB in Share
Changing average chunk size of share: success

Additional Information

  1. avgchunksize 是一個隱藏的命令。
  2. 支援的最大平均區塊大小為 1MB，這可能會導致最大區塊大小為 4MB。 

Affected Products

CloudBoost

Products

CloudBoost Virtual Appliance
Article Properties
Article Number: 000003763
Article Type: How To
Last Modified: 10 Mar 2026
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.