CloudBoost：如何调整平均区块大小

Summary: CloudBoost 2.2.2 添加了隐藏的 avgchunksize 命令，允许管理员通过“avgchunksize show”或“avgchunksize change SIZE”查看或更改平均区块大小（最多 1 MB），从而重新启动系统。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

随着 CloudBoost 2.2.2，您现在可以更改在 CloudBoost 使用命令 avgchunksize。

  • 语法：  
avgchunksize <show|change SIZE>
  • 要显示当前平均区块大小，请使用 avgchunksize show.
    示例：  
admin@mag-fs> avgchunksize show
  • 当前平均区块大小：256
  • 要更改当前平均区块大小，请使用 avgchunksize change #，其中 # 是以 KB 为单位的大小。  
    示例： 
admin@mag-fs> avgchunksize change 1024
This command will restart the appliance! Are you sure?
To CONTINUE please type "Yes"
Yes

The system is going down for reboot NOW!
100% done. Status: Changed averageChunkSize from 256 to 1024 KB in Share
Changing average chunk size of share: success

Additional Information

  1. avgchunksize 是一个隐藏的命令。
  2. 支持的最大平均区块大小为 1MB，这可能会导致最大区块大小为 4MB。 

Affected Products

CloudBoost

Products

CloudBoost Virtual Appliance
Article Properties
Article Number: 000003763
Article Type: How To
Last Modified: 10 Mar 2026
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.