PowerFlex 無法複製範本，因為範本已存在

Summary: 本文說明如何針對因為範本已存在而發生的 PowerFlex 建立範本錯誤進行故障診斷。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

使用複製選項與 PFxM UI 建立範本時，程序 （完成） 無法完成，且 error HTTP 409 Conflict or connection refused is generated  

detailedMessage=The operation cannot be performed because the template id already exists

嚴重性錯誤訊息

複製範本嚴重錯誤訊息

Cause

來源克隆範本的問題 

Resolution

  • 驗證樣本是否正確
  • 建立新範本 
  • 從其他範本複製

Affected Products

ScaleIO
Article Properties
Article Number: 000325160
Article Type: Solution
Last Modified: 02 Feb 2026
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.