PowerFlex 无法克隆模板，因为模板已存在

Summary: 本文介绍如何对由于模板已存在而导致的 PowerFlex 创建模板错误进行故障处理。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

在 PFxM UI 中使用克隆选项创建模板时，该过程（完成）未完成，并且 error HTTP 409 Conflict or connection refused is generated  

detailedMessage=The operation cannot be performed because the template id already exists

严重性错误消息

克隆模板严重错误消息

Cause

源克隆模板的问题 

Resolution

  • 验证模板是否正确
  • 创建新模板 
  • 从另一个模板克隆

Affected Products

ScaleIO
Article Properties
Article Number: 000325160
Article Type: Solution
Last Modified: 02 Feb 2026
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.