OptiPlex XE3 Teardown Removal Guides for Customer Replaceable Units (CRUs)
Summary: An OptiPlex XE3 teardown removal can be performed for customer replaceable units by following these instructions.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
These guides take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of the various OptiPlex XE3 form factors. (CRUs are the parts of the system that should not need an engineer to remove or replace.) The guides also include figures to reference what is involved.
Table of Contents:
Cause
Removal Guide Introduction
If these guides do not cover what you are looking to do, then reference your System Manual.
The Mini Tower (MT) Chassis
The Small Form Factor (SFF) Chassis
Resolution
Affected Products
Optiplex XE3Article Properties
Article Number: 000146733
Article Type: Solution
Last Modified: 27 May 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.