由於連接埠群組設定檔錯誤,Dell Networking OS10 S5200 或 S4148U 連接埠未出現

Summary: 已插入已知良好的纜線和傳發器,但連接埠未出現。已驗證埠是否未關閉。為什麼連接埠沒有出現?

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

交換器機型

S4148U
、S5200

軟體版本

OS10

如何變更連接埠群組模式

埠組可能未配置為以指定的速度進行協商。

命令 說明
show port-group 這會顯示所有連接埠群組及其目前的設定方式。

標記要修改
的連接埠群組編號 我們正在尋找連接埠 56。

S5200 範例:

OS10# show port-group

Port-group            Mode           Ports     FEM
port-group1/1/1       Eth 25g-4x     1  2  3  4     -
port-group1/1/2       Eth 10g-4x     5  6  7  8     -
port-group1/1/3       Eth 10g-4x     9  10  11  12     -
port-group1/1/4       Eth 10g-4x     13  14  15  16     -
port-group1/1/5       Eth 25g-4x     17  18  19  20     -
port-group1/1/6       Eth 25g-4x     21  22  23  24     -
port-group1/1/7       Eth 25g-4x     25  26  27  28     -
port-group1/1/8       Eth 25g-4x     29  30  31  32     -
port-group1/1/9       Eth 25g-4x     33  34  35  36     -
port-group1/1/10      Eth 10g-4x     37  38  39  40     -
port-group1/1/11      Eth 25g-4x     41  42  43  44     -
port-group1/1/12      Eth 25g-4x     45  46  47  48     -
port-group1/1/13      Eth 40g-2x     49  50     -
port-group1/1/14      Eth 40g-2x     51  52     -
port-group1/1/15      Eth 100g-1x    53         -
port-group1/1/16      Eth 100g-1x    54         -
port-group1/1/17      Eth 100g-1x    55         -
port-group1/1/18      Eth 100g-1x    56         -

S4148U 範例:

OS10# show port-group

Port-group            Mode           Ports     FEM
port-group1/1/1       Eth 10g-4x     1  2  3  4     -
port-group1/1/2       FC  16g-2x     5  6  7  8     -
port-group1/1/3       FC  16g-2x     9  10  11  12     -
port-group1/1/4       FC  16g-2x     13  14  15  16     -
port-group1/1/5       FC  16g-2x     17  18  19  20     -
port-group1/1/6       Eth 10g-4x     21  22  23  24     -
port-group1/1/7       Eth 100g-1x    25         -
port-group1/1/8       Eth 40g-1x     26         -
port-group1/1/9       Eth 100g-1x    29         -
port-group1/1/10      Eth 40g-1x     30         -

範例:

命令 說明
OS10# show port-group 這會顯示所有連接埠群組及其目前的設定方式。
OS10(config)# port-group 1/1/18 選擇您要修改的連接埠
OS10(conf-pg-1/1/18)# mode eth 40g-1x 指定您要設定連接埠的速度

證實:

<165>1 2019-09-11T23:21:00.470567+00:00 S5248F-ON-U24 dn_ifm 852 - -  Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_UP: Interface admin state up :ethernet1/1/56:1

確認連接埠群組已變更:

OS10# show port-group

Port-group            Mode           Ports     FEM
port-group1/1/1       Eth 25g-4x     1  2  3  4     -
port-group1/1/2       Eth 10g-4x     5  6  7  8     -
port-group1/1/3       Eth 10g-4x     9  10  11  12     -
port-group1/1/4       Eth 10g-4x     13  14  15  16     -
port-group1/1/5       Eth 25g-4x     17  18  19  20     -
port-group1/1/6       Eth 25g-4x     21  22  23  24     -
port-group1/1/7       Eth 25g-4x     25  26  27  28     -
port-group1/1/8       Eth 25g-4x     29  30  31  32     -
port-group1/1/9       Eth 25g-4x     33  34  35  36     -
port-group1/1/10      Eth 10g-4x     37  38  39  40     -
port-group1/1/11      Eth 25g-4x     41  42  43  44     -
port-group1/1/12      Eth 25g-4x     45  46  47  48     -
port-group1/1/13      Eth 40g-2x     49  50     -
port-group1/1/14      Eth 40g-2x     51  52     -
port-group1/1/15      Eth 100g-1x    53         -
port-group1/1/16      Eth 100g-1x    54         -
port-group1/1/17      Eth 100g-1x    55         -
port-group1/1/18      Eth 40g-1x     56         -

軟體修正

依設計運作

 

Affected Products

PowerSwitch S4112F-ON/S4112T-ON, PowerSwitch S4148F-ON/S4148T-ON/S4148FE-ON, PowerSwitch S4148U-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON, PowerSwitch S5248F-ON
Article Properties
Article Number: 000128222
Article Type: How To
Last Modified: 26 Nov 2025
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.