Avamar: GSAN 성능 저하 및 서버가 동기화 중 상태

Summary: 일반적으로 90%를 초과하는 높은 메타데이터 활용도로 인해 mccli server show-prop 명령에서 Avamar의 GSAN 성능 저하 상태 및 동기화 중 상태가 표시될 수 있습니다. 이 문제는 잘못된 백업, GSAN으로의 복제 또는 기타 요인으로 인해 발생할 수 있습니다. 이 문제를 해결하려면 메타데이터 용량을 줄이고 Synchronizing 상태를 제거하는 방법을 자세히 설명하는 Dell 내부 문서 000047627에 설명된 단계를 따르십시오. 이러한 단계를 완료한 후 mccli server show-prop 명령은 상태 속성에 전체 액세스를 표시해야 합니다. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

"mccli server show-prop" 명령은 동기화 상태를 표시하며, 이러한 이유로 노드는 읽기 전용 모드에 있습니다.

admin@AVMR-SRV:~/>: mccli server show-prop
0,23000,CLI command completed successfully.
Attribute                                    Value
-------------------------------------------- ----------------------------
State                                        Synchronizing
Active sessions                              1
Total capacity                               2.2 TB
Capacity used                                2.1 TB
Server utilization                           92.5%
Bytes protected (client pre-comp size)       139.6 TB
Bytes protected quota (client pre-comp size) Not configured
License expiration                           Never
Time since Server initialization             147 days 22h:34m
Last checkpoint                              2024-07-10 11:11:40 CDT
Last validated checkpoint                    2024-07-10 10:05:41 CDT
System Name                                  AVMR-SRV.LAB.COM
System ID                                    1234567890@00:50:55:BD:99:77
HFSAddr                                      AVMR-SRV
HFSPort                                      27000
IP address                                   192.168.1.113
Number of nodes                              1
Nodes Online                                 0
Nodes Offline                                0
Nodes Read-only                              1
Nodes Timed-out                              0
admin@AVMR-SRV:~/>:

status.dpn 은 액세스 상태를 admin으로 표시합니다.

admin@AVMR-SRV:~/>: status.dpn
Wed Jul 10 08:11:42 CDT 2024  [AVMR-SRV.LAB.COM] Wed Jul 10 13:11:42 2024 UTC (Initialized Tue Feb 13 19:33:08 2024 UTC)
Node   IP Address     Version   State   Runlevel  Srvr+Root+User Dis Suspend Load UsedMB Errlen  %Full   Percent Full and Stripe Status by Disk
0.0    192.168.1.113 19.10.0-135  ONLINE fullaccess mhpu+0000+0000   5 false   1.37 15385  7750230  64.0%  64%(onl:4285) 64%(onl:4287) 64%(onl:4283)
Srvr+Root+User Modes = migrate + hfswriteable + persistwriteable + useraccntwriteable

System ID: 1234567890@00:50:55:BD:99:77


All reported states=(ONLINE), runlevels=(fullaccess), modes=(mhpu+0000+0000)
System-Status: ok
Access-Status: admin

Last checkpoint: cp.20240709142706 finished Tue Jul  9 09:27:44 2024 after 00m 38s (OK)
Last GC: finished Tue Jul  9 08:27:29 2024 after 26m 35s >> recovered 129.99 MB (OK)
Last hfscheck: finished Tue Jul  9 09:22:04 2024 after 52m 11s >> checked 8472 of 8472 stripes (OK)

Maintenance windows scheduler capacity profile is active.
  The maintenance window is currently running.
    Next backup window start time: Wed Jul 10 18:00:00 2024 CDT
  Next maintenance window start time: Thu Jul 11 08:00:00 2024 CDT
admin@AVMR-SRV:~/>:

GSAN 상태가 degraded입니다.

admin@AVMR-SRV:~/>: dpnctl status
Identity added: /home/admin/.ssh/admin_key (/home/admin/.ssh/admin_key)
dpnctl: INFO: gsan status: degraded
dpnctl: INFO: MCS status: up.
dpnctl: INFO: emt status: up.
dpnctl: INFO: Backup scheduler status: up.
dpnctl: INFO: Maintenance windows scheduler status: enabled.
dpnctl: INFO: Unattended startup status: enabled.
dpnctl: INFO: avinstaller status: up.
dpnctl: INFO: ddrmaint-service status: up.
dpnctl: INFO: ESE status: up.
admin@AVMR-SRV:~/>:

 

Cause

동기화 상태는 메타데이터 사용률이 높을 때 발생합니다. 이 시나리오에서 메타데이터 용량은 99.91%입니다.

admin@AVMR-SRV:~/>: mcserver.sh --status | grep metadata
  metadataUtilization (larger of (nstripes/totalStripesPermitted) or (stripeReserved/(nodeSizeAfterDiskReadOnly * stripeUtilizationCapacityFactor)) * 100): 99.91
admin@AVMR-SRV:~/>:

위의 시나리오는 이 Avamar(GSAN)에 대한 잘못된 복제가 수행되어 발생했습니다. 메타데이터 용량을 늘릴 수 있는 다른 요인이 있습니다. 자세한 내용은 Avamar 메타데이터 용량 해결 경로 문서를 참조하십시오.

 

Resolution

Dell 기술 지원 부서에서 이 절차를 수행해야 합니다. 서비스 요청을 열고 이 문서 번호를 언급하십시오. Dell 기술 지원 부서의 해결 방법은 내부 정보 섹션에 설명되어 있습니다.

 

Affected Products

Avamar, Avamar Server
Article Properties
Article Number: 000228916
Article Type: Solution
Last Modified: 17 Dec 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.