ECS：RACADM 傳送「一個本機 RACADM 例項已在執行中。正在退出目前工作階段」

Summary: 本文說明如果出現上述訊息，如何讓 racadm 命令運作。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

執行中 racadm 有時無法執行，如以下範例所示：

admin@ecsnode1:~> sudo -i racadm getversion

One Instance of Local RACADM is already executing. Exiting the current session.

Cause

可使用 racadm 可能在上一個會話中運行，並且在 bash 關閉之前未完成，留下現在阻止該命令的 PID 檔。

Resolution

檢查以下 PID 檔案是否存在：

admin@ecsnode1:~> ls -l /var/run/local_racadm.pid
-rw-r--r-- 1 root root 5 Mar 2  2022 /var/run/local_racadm.pid
admin@ecsnode1:~>

檢查此刻是否有其他人連接到節點，除了你自己：

admin@ecsnode1:~> who
admin    pts/0        Mar  3 14:34 (169.254.1.1)
admin@ecsnode1:~>

如果沒有任何人執行 racadm 命令 在同一時刻，刪除 PID 檔：

admin@ecsnode1:~> sudo rm -rf /var/run/local_racadm.pid 
admin@ecsnode1:~>

確認目前運作正常：

admin@ecsnode1:~> sudo -i racadm getversion
Bios Version                     = 2.3.10

iDRAC Version                    = 4.40.40.00

Lifecycle Controller Version     = 4.40.40.00

IDSDM Version                    = NA

Affected Products

ECS

Products

ECS Appliance, ECS Appliance Gen 3, Elastic Cloud Storage
Article Properties
Article Number: 000196996
Article Type: Solution
Last Modified: 11 Dec 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.