Dell Unity: Is directly attaching a host to a Unity system supported (Dell Correctable)
Summary: Is directly attaching a host to a Unity system supported and can it be implemented
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Directly attaching a host to a Unity system is supported .
Please refer to page 30 in the below Dell EMC Unity™ Family Configuring Hosts to Access Fibre Channel (FC) or iSCSI Storage document :
"Directly attaching a host to a Unity system is supported if the host connects to both SPs and has the required multipath software."
https://dl.dell.com/content/manual70418468-dell-emc-unity-family-configuring-hosts-to-access-fibre-channel-fc-or-iscsi-storage.pdf?language=en-us&ps=true
Please refer to page 30 in the below Dell EMC Unity™ Family Configuring Hosts to Access Fibre Channel (FC) or iSCSI Storage document :
"Directly attaching a host to a Unity system is supported if the host connects to both SPs and has the required multipath software."
https://dl.dell.com/content/manual70418468-dell-emc-unity-family-configuring-hosts-to-access-fibre-channel-fc-or-iscsi-storage.pdf?language=en-us&ps=true
Affected Products
Dell EMC Unity FamilyProducts
Dell EMC Unity FamilyArticle Properties
Article Number: 000019189
Article Type: How To
Last Modified: 15 Dec 2022
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.