DLm: System Manager 명령을 사용할 때 "VTEn에서 명령을 실행할 수 없음" 오류 발생
Summary: System Manager를 통해 실행된 DLm 명령은 실행이 60초를 초과하는 경우 "VTEn에서 명령을 실행할 수 없음" 메시지를 반환할 수 있습니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
DLm System Manager를 통해 실행된 DLm 명령은 다음 메시지를 반환합니다.
Could not run command on VTEnCause
DLm 펌웨어 버전 5.2 및 5.3 릴리스는 근본적인 문제를 정확하게 반영하지 않는 일반 오류 메시지를 표시합니다.
버전 5.4 이상 릴리스에서는 이 기능이 개선되었으며, 근본 원인을 보다 구체적으로 식별하기 위해 오류 메시지가 업데이트되었습니다.
Resolution
이 문제는 버전 5.4 이상 릴리스에서 해결되었으며, 근본 원인을 보다 구체적으로 식별하기 위해 오류 메시지가 업데이트되었습니다. Error: Command Timed Out.
해결 방법:
없음
참고: DSM 콘솔 패널에 오류 메시지가 나타나더라도 Virtuent 명령은 성공적으로 완료됩니다. DSM 로그 패널에서 명령 결과를 확인합니다.
Affected Products
Disk Library for mainframe DLm2500, Disk Library for mainframe DLm8500Article Properties
Article Number: 000195373
Article Type: Solution
Last Modified: 14 Aug 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.