PowerProtect: VM Direct Protection Engine kunne ikke udrulles pga. initialiseringsfejl

Summary: Direct Engine-implementeringen af Virtual Machine (VM) kan ikke initialiseres med meddelelsen Kan ikke oprette forbindelse til ekstern vProxy over 9090-port.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

PowerProtect Data Manager-enheden bruges til at beskytte vSphere-miljøet med VM Direct Engine-løsningen. VM Direct Engine-udrulningen i en DMZ-klynge (demilitariseret zone) mislykkes under initialiseringsfasen. Status for systemjob viser:

ProxySession unsuccessful during initialization. Unable to deploy and verify the vProxy my-proxy.my-domain.com. Unable to query vProxy status after 'Deploy'. Request unsuccessful. Unable to connect to External vproxy 'my-proxy.my-domain.com' on port '9090', the host service is not running.

Action : Deploy
TransportMode : HotaddPreferred
Vproxy : my-proxy.my-domain.com
Error : ProxySession unsuccessful during initialization. Unable to deploy and verify the vProxy my-proxy.my-domain.com. Unable to query vProxy status after 'Deploy'. Request unsuccessful. Unable to connect to External vproxy 'my-proxy.my-domain.com' on port '9090', the host service is not running. (0)
ProtectionType : VM
VproxyStatus : Failed


Ikonet /var/log/brs/vmdm/vmdm.log Viser:

YYYY-MM-DD20:37:02.229Z ERROR [] [vproxyMonitor] [][][][TRACE_ID:b28dabec92e4fcae][] [c.e.b.v.v.s.VPEProxyService.updateTask(809)] - Update VM Direct Protection Engine failed 40be4802-972d-416f-b131-43890b6c32ac ManagedProxySession(state=Failure, id=32a99bf2-1c6e-47e7-aff1-4b26b7026cc8, error: code=0, text=ProxySession unsuccessful during initialization.  Unable to deploy and verify the vProxy my-proxy.my-domain.com.  Unable to query vProxy status after 'Deploy'.  Request unsuccessful.  Unable to resolve External vproxy 'my-proxy.my-domain.com' IP address in DNS server(s).)

 

Cause

PowerProtect-enheden har ikke adgang til VM Direct Engine over port 9090.

admin@ppdm:~> curl -v my-proxy.my-domain.com:9090
*   Trying 192.168.9.131:9090...
* connect to 192.168.9.131 port 9090 failed: No route to host
* Failed to connect to my-proxy.my-domain.com port 9090 after 18548 ms: Couldn't connect to server
* Closing connection 0
curl: (7) Failed to connect to my-proxy.my-domain.com port 9090 after 18548 ms: Couldn't connect to server
admin@ppdm:~>

 

Resolution

Miljøet, firewallen eller netværket skal konfigureres, så PowerProtect-enheden kan kommunikere med VM Direct Engine via port 22 og 9090.
Article Properties
Article Number: 000399113
Article Type: Solution
Last Modified: 19 Dec 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.