PowerFlex 4.5 knooppuntuitbreiding in SO-service mislukt wanneer geselecteerd SLES-knooppunt als referentieknooppunt.
Summary: PowerFlex Manager versie 4.5, SO De uitbreiding van het serviceknooppunt mislukt wanneer we het SLES-knooppunt selecteren als het referentieknooppunt tijdens de uitbreiding.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
SLES-knooppuntuitbreiding kiest standaard de CentOS-image.
Cause
De service Bestaande toevoegen is uitgevoerd met een gemengd besturingssysteemtype met Intelligent Catalog en een aangepaste CentOS-image.
Na het brownfield koos de uitbreiding van het SLES-knooppunt in de implementatieworkflow in 4.5 de CentOS-image in plaats van SLES, hoewel de image van het besturingssysteem was ingesteld op "Use Compliance File Linux image" in de resourcegroep.
Na het brownfield koos de uitbreiding van het SLES-knooppunt in de implementatieworkflow in 4.5 de CentOS-image in plaats van SLES, hoewel de image van het besturingssysteem was ingesteld op "Use Compliance File Linux image" in de resourcegroep.
Resolution
- IC bevat geen SLES-afbeelding
- Upload de SLES-image handmatig.
- Wijzig de brongroep om de SLES-image in te stellen en de uitbreiding van het SLES-knooppunt uit te voeren
Article Properties
Article Number: 000217851
Article Type: Solution
Last Modified: 09 Jun 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.