ViPR-kontroller: VMware Site Recovery Manager (SRM)-failover mislykkes med feil: "Kan ikke gjenopprette datalager"

Summary: VMware Site Recovery Manager (SRM)-failover mislykkes med feilen – Kunne ikke gjenopprette datalagringen

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Implementering av VMware SRM-failover

Brukeren kan ikke utføre en VMware Site Recovery Manager (SRM)-failover ved hjelp av RecoverPoint (RP).
VMware SRM sendte failover-kommandoen direkte til RP.

Merk: I dette scenariet var ikke ViPR-kontrolleren en del av failover-prosedyren.
Det er ingen relaterte hendelser i ViPR-kontrollerloggene.

VMware Site Recovery Manager (SRM):

4. Create writable storage snapshot    Error - Some virtual machines in the protection group '<protection group>' could not be recovered Failed to recover datastore '<datastore name>'. VMFS volume residing on recovered devices '"<WWN of volume>"' cannot be found. Recovered device '<WWN of volume>' not found after HBA rescan. Failed to recover datastore '<datastore name>'. VMFS volume residing on recovered devices '"<WWN of volume>"' cannot be found. Recovered device '<WWN of volume>' not found after HBA rescan.    2019-02-13 22:05:44 (UTC 0)    2019-02-13 22:06:23 (UTC 0)    00:00:39

4.1. Protection Group <protection group>    Error - Failed to recover datastore '<datastore name>'. VMFS volume residing on recovered devices '"<WWN of volume>"' cannot be found. Recovered device '<WWN of volume>' not found after HBA rescan. Failed to recover datastore '<datastore name>'. VMFS volume residing on recovered devices '"<WWN of volume>"' cannot be found. Recovered device '<WWN of volume>' not found after HBA rescan. Some virtual machines in the protection group 'protection group' could not be recovered

 

Cause

Årsaken til problemet er at mål-LUN-ene ikke ble eksportert til målklyngen.

 

Resolution

Omgåelse av problemet:

  • Hvis du vil tilrettelegge for en SRM-failover, må du sørge for at mål-LUN-ene må eksporteres til målklyngen på forhånd.
  • Dette gjør at volumene kan ses av ESXi-vertene under skanningen på nytt.
  • Dette kan gjøres ved hjelp av katalogelementet "Eksporter volum til en vert" i VIPR-kontrolleren.

 

Products

RecoverPoint
Article Properties
Article Number: 000057470
Article Type: Solution
Last Modified: 26 Nov 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.