Data Domain: DD3300-Festplatten-Beacon
Summary: In diesem Artikel wird die Funktion "Disk Beacon" für DD3300-Systeme eingeführt, die mit Data Domain Operating System (DDOS) 6.2.x eingeführt wurde. Der KB-Artikel dient als Anleitung zum Beacon einer Festplatte auf dem DD3300. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Zusammenfassung:
- In diesem Artikel wird die
disk beaconFunktion für DD3300-Systeme; eingeführt in DDOS 6.2.x. - Der Befehl
disk beacon 1.nausgegeben wird (mitSSH/CLI) und führt dazu, dass auf der entsprechenden Festplatte eine Laufwerksidentifikations-LED blinkt. - Die physische Steckplatznummerierung (0-basiert; 1.0) auf dem DD3300 stimmt nicht mit der DDOS-Steckplatznummerierung überein, die bei 1.1 beginnt.
- Diese Funktion hilft beim Troubleshooting und Austausch von fehlerhaften Festplatten auf dem DD3300.
Gilt für:
- DD3300 (>= DDOS 6.2.x)
Lösung:
- 12x vordere Scheiben (1.1 -> 1.12) oder 1x hintere Scheibe (1.13) können beleuchtet werden.
- 4 interne Festplatten (1.15 –> 1.18) unterstützen kein Beaconing.
- DD-CLI-Befehlssyntax:
-
disk beacon 1.<slot number> OR <serial number>
-
- So stoppen Sie die Beacon-Taste:
-
Ctrl + C
-
Beispiel:
Zu Beacon Disk Slot 1.7:
# disk beacon 1.7
Start disk LED beaconing for 1.7 ...
^C
LED beaconing completed.
#
So aktivieren Sie eine Festplatte anhand der Seriennummer:
- Erfassen Sie die Seriennummer der physischen Hardware mithilfe der
disk show hardware detailed.
# disk show hardware detailed
Physical Hardware
Disk Slot Manufacturer/Model Firmware Serial No. Capacity Type State
(pci/idx)
---- --------- ------------------ -------- -------------- ---------- -------- --------
1.1 0 ST4000NM0295 DT31 ZC11Z1GB 3.64 TiB SAS In Use
1.2 1 ST4000NM0295 DT31 ZC1207Y1 3.64 TiB SAS In Use
1.3 2 ST4000NM0295 DT31 ZC12156M 3.64 TiB SAS In Use
1.4 3 ST4000NM0295 DT31 ZC11Z2G6 3.64 TiB SAS In Use
1.5 4 ST4000NM0295 DT31 ZC12108B 3.64 TiB SAS In Use
1.6 5 ST4000NM0295 DT31 ZC120E4S 3.64 TiB SAS In Use
1.7 6 ST4000NM0295 DT31 ZC11Z17L 3.64 TiB SAS In Use
1.8 7 ST4000NM0295 DT31 ZC1207YX 3.64 TiB SAS In Use
1.9 8 ST4000NM0295 DT31 ZC11Z39H 3.64 TiB SAS In Use
1.10 9 ST4000NM0295 DT31 ZC11Z3NW 3.64 TiB SAS In Use
1.11 10 (absent) (absent) (absent) (absent) (absent) Absent
1.12 11 (absent) (absent) (absent) (absent) (absent) Absent
1.13 12 MZ7KM480HMHQ0D3 GD53 S3BUNX0J600149 447.13 GiB SATA-SSD Non-RAID
---- --------- ------------------ -------- -------------- ---------- -------- --------
- Beacon für die Festplatte mit der entsprechenden Seriennummer:
# disk beacon ZC11Z17L
Start disk LED beaconing for 1.7 ...
^C
LED beaconing completed.
#
Additional Information
Wenn ein Festplatten-Beacon bereits auf einer anderen Festplatte aktiv ist (aus einer anderen SSH-Sitzung), fordert das System Sie auf, das aktive Beacon zu stoppen, wie hier dargestellt:
# disk beacon 1.13
A beacon command is already running on disk 1.7.
Do you want to terminate it? (yes|no) [yes]: yes
Beacon on disk 1.7 terminated.
Start disk LED beaconing for 1.13 ...
^C
LED beaconing completed.
#
Die ursprüngliche SSH-Sitzung zeigt die folgende Ausgabe an:
**** Disk beaconing terminated by another disk beacon operation.
Referenz:
Affected Products
Data DomainProducts
Data Domain, DD3300 ApplianceArticle Properties
Article Number: 000013951
Article Type: How To
Last Modified: 06 Feb 2026
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.