「Data Domain:DD3300ディスク ビーコン
Summary: この記事では、Data Domain Operating System (DDOS) 6.2.xとともに導入されたDD3300システムの「ディスク ビーコン」機能について説明します。 KB記事は、DD3300でディスクをビーコンする方法に関するガイドとして機能します。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
[Summary]:
- この記事では、DD3300システムの「ディスク ビーコン」機能について説明します。DDOS 6.2.xで導入。
- コマンド「disk beacon 1.n」が(SSH/CLIを使用して)発行されると、対応するディスクのディスク識別LEDが点滅します。
- DD3300の物理スロット番号(0ベース、1.0)が、1.1で始まるDDOSスロット番号と一致しません
- この機能は、DD3300で障害が発生したディスクのトラブルシューティングと交換に役立ちます。
該当製品:
- DD3300(> = DDOS 6.2.x)
解決方法:
- 12台のフロント ディスク(1.1 -> 1.12)または1台のリア ディスク(1.13)をビーコンで接続できます。
- 4x内蔵ディスク(1.15-> 1.18)はビーコンをサポートしていません。
- DD-CLIコマンド構文:
-
disk beacon 1.<slot number> OR <serial number>
-
- ビーコンプレスを停止するには:
-
Ctrl + C
-
Example:
ビーコン ディスク スロット1.7へ:
# disk beacon 1.7
Start disk LED beaconing for 1.7 ...
^C
LED beaconing completed.
#
シリアル番号でディスクをビーコンするには、次の手順を実行します。
>「disk show hardware detailed」コマンドを使用して、物理ハードウェアのシリアル番号を収集します。
# disk show hardware detailed
Physical Hardware
Disk Slot Manufacturer/Model Firmware Serial No. Capacity Type State
(pci/idx)
---- --------- ------------------ -------- -------------- ---------- -------- --------
1.1 0 ST4000NM0295 DT31 ZC11Z1GB 3.64 TiB SAS In Use
1.2 1 ST4000NM0295 DT31 ZC1207Y1 3.64 TiB SAS In Use
1.3 2 ST4000NM0295 DT31 ZC12156M 3.64 TiB SAS In Use
1.4 3 ST4000NM0295 DT31 ZC11Z2G6 3.64 TiB SAS In Use
1.5 4 ST4000NM0295 DT31 ZC12108B 3.64 TiB SAS In Use
1.6 5 ST4000NM0295 DT31 ZC120E4S 3.64 TiB SAS In Use
1.7 6 ST4000NM0295 DT31 ZC11Z17L 3.64 TiB SAS In Use
1.8 7 ST4000NM0295 DT31 ZC1207YX 3.64 TiB SAS In Use
1.9 8 ST4000NM0295 DT31 ZC11Z39H 3.64 TiB SAS In Use
1.10 9 ST4000NM0295 DT31 ZC11Z3NW 3.64 TiB SAS In Use
1.11 10 (absent) (absent) (absent) (absent) (absent) Absent
1.12 11 (absent) (absent) (absent) (absent) (absent) Absent
1.13 12 MZ7KM480HMHQ0D3 GD53 S3BUNX0J600149 447.13 GiB SATA-SSD Non-RAID
---- --------- ------------------ -------- -------------- ---------- -------- --------
> 適切なシリアル番号を使用したディスクのビーコン
# disk beacon ZC11Z17L
Start disk LED beaconing for 1.7 ...
^C
LED beaconing completed.
#
Additional Information
ディスク ビーコンが別のディスク(別のSSHセッションから)ですでにアクティブになっている場合は、次に示すように、アクティブなビーコンを停止するように求められます。
# disk beacon 1.13
A beacon command is already running on disk 1.7.
Do you want to terminate it? (yes|no) [yes]: yes
Beacon on disk 1.7 terminated.
Start disk LED beaconing for 1.13 ...
^C
LED beaconing completed.
#
元のSSHセッションでは、次の出力が表示されます。
**** Disk beaconing terminated by another disk beacon operation.
参考:
DD3300ディスク アラートを正しい物理ディスク スロットにマッピングしています
DD3300ディスク ビーコン コマンドの失敗
DD3300ディスクLEDの動作
について DD3300ハードウェアの概要および設置ガイド
Affected Products
Data DomainProducts
Data Domain, DD3300 ApplianceArticle Properties
Article Number: 000013951
Article Type: How To
Last Modified: 29 Sept 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.