Data Domain: DD3300 디스크 비콘
Summary: 이 문서에서는 DDOS(Data domain Operating System) 6.2.x와 함께 제공되는 DD3300 시스템용 디스크 비콘 기능을 소개합니다. KB 문서는 DD3300에서 디스크를 비콘하는 방법에 대한 가이드 역할을 합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
요약:
- 이 문서에서는 DD3300 시스템의 '디스크 비콘' 기능을 소개합니다. DDOS 6.2.x에 도입되었습니다.
- 'disk beacon 1.n' 명령이 실행되고(SSH/CLI 사용) 해당 디스크에서 디스크 식별 LED가 깜박입니다.
- DD3300의 물리적 슬롯 번호 지정(0부터 시작, 1.0)이 1.1부터 시작하는 DDOS 슬롯 번호와 일치하지 않음
- 이 기능은 DD3300에서 장애가 발생한 디스크의 문제 해결 및 교체에 도움이 됩니다.
적용 대상:
- DD3300(>= DDOS 6.2.x)
해결 방법:
- 12x 전면 디스크(1.1 -> 1.12) 또는 1x 후면 디스크(1.13) 비콘을 설정할 수 있습니다.
- 4x 내부 디스크(1.15 -> 1.18)는 비콘을 지원하지 않습니다.
- DD-CLI 명령 구문:
-
disk beacon 1.<slot number> OR <serial number>
-
- Beacon press를 중지하려면:
-
Ctrl + C
-
예:
비콘 디스크 슬롯 1.7:
# disk beacon 1.7
Start disk LED beaconing for 1.7 ...
^C
LED beaconing completed.
#
일련 번호로 디스크를 비콘하려면 다음을 수행합니다.
>'disk show hardware detailed' 명령을 사용하여 물리적 하드웨어 일련 번호를 수집합니다.
# disk show hardware detailed
Physical Hardware
Disk Slot Manufacturer/Model Firmware Serial No. Capacity Type State
(pci/idx)
---- --------- ------------------ -------- -------------- ---------- -------- --------
1.1 0 ST4000NM0295 DT31 ZC11Z1GB 3.64 TiB SAS In Use
1.2 1 ST4000NM0295 DT31 ZC1207Y1 3.64 TiB SAS In Use
1.3 2 ST4000NM0295 DT31 ZC12156M 3.64 TiB SAS In Use
1.4 3 ST4000NM0295 DT31 ZC11Z2G6 3.64 TiB SAS In Use
1.5 4 ST4000NM0295 DT31 ZC12108B 3.64 TiB SAS In Use
1.6 5 ST4000NM0295 DT31 ZC120E4S 3.64 TiB SAS In Use
1.7 6 ST4000NM0295 DT31 ZC11Z17L 3.64 TiB SAS In Use
1.8 7 ST4000NM0295 DT31 ZC1207YX 3.64 TiB SAS In Use
1.9 8 ST4000NM0295 DT31 ZC11Z39H 3.64 TiB SAS In Use
1.10 9 ST4000NM0295 DT31 ZC11Z3NW 3.64 TiB SAS In Use
1.11 10 (absent) (absent) (absent) (absent) (absent) Absent
1.12 11 (absent) (absent) (absent) (absent) (absent) Absent
1.13 12 MZ7KM480HMHQ0D3 GD53 S3BUNX0J600149 447.13 GiB SATA-SSD Non-RAID
---- --------- ------------------ -------- -------------- ---------- -------- --------
> 적절한 일련 번호를 사용하여 디스크를 비콘합니다.
# disk beacon ZC11Z17L
Start disk LED beaconing for 1.7 ...
^C
LED beaconing completed.
#
Additional Information
디스크 비콘이 다른 디스크(다른 SSH 세션에서)에서 이미 활성 상태인 경우 시스템은 다음과 같이 활성 비콘을 중지하라는 프롬프트를 표시합니다.
# disk beacon 1.13
A beacon command is already running on disk 1.7.
Do you want to terminate it? (yes|no) [yes]: yes
Beacon on disk 1.7 terminated.
Start disk LED beaconing for 1.13 ...
^C
LED beaconing completed.
#
원래 SSH 세션에는 다음과 같은 출력이 표시됩니다.
**** Disk beaconing terminated by another disk beacon operation.
참조:
DD3300 디스크 알림을 올바른 물리적 디스크 슬롯
에 매핑DD3300 디스크 비콘 명령 실패
DD3300 디스크 LED 동작
이해DD3300 하드웨어 개요 및 설치 가이드
Affected Products
Data DomainProducts
Data Domain, DD3300 ApplianceArticle Properties
Article Number: 000013951
Article Type: How To
Last Modified: 29 Sept 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.