Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Unisphere for PowerMax: "Address already in use: bind 127.0.0.1:9999" 오류와 함께 SMAS가 계속 충돌합니다.

Summary: SMAS가 5초간 중단됨

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Symptoms

새로 설치된 Unisphere for PowerMax는 5초
이내에 SMAS 드롭다운을 실행할
수 없습니다. 일부 시나리오에서는 run.log만 생성됩니다. 설치 후
SMAS가 정상적으로 실행되지 않으므로 일부 시나리오에서 smas.log도 생성됩니다

. 아래 오류가 모든 로그

오류 msg(smas.log)에 표시됩니다.
 
[호스트 컨트롤러] 21:43:20,514 ERROR [org.jboss.msc.service.fail] (MSC service thread 1-2) MSC00001: failed to start service jboss.remoting.server.management: org.jboss.msc.service.StartException
in service jboss.remoting.server.management: JBAS017112: 이미 사용 중인 주소: bind 127.0.0.1:9999

오류 msg(run.log):
 
[호스트 컨트롤러] 21:43:20,529 FATAL [org.jboss.as.host.controller](컨트롤러 부팅 스레드) xxxx010933: 호스트 컨트롤러 부팅이 복구할 수 없는 방식으로 실패했습니다. 종료. 자세한 내용은 이전 메시지를 참조하십시오.
[호스트 컨트롤러] 21:43:20,576 INFO [org.jboss.as](MSC 서비스 스레드 1-5) xxxx015950: JBoss AS 7.1.3a. OCI-emc "xxxxx"가 9ms
21:43:21,075 INFO [org.jboss.as.process.Host Controller.status]에서 중지됨(호스트 컨트롤러의 경우 사신) xxxx012010: 프로세스 '호스트 컨트롤러'가 종료 상태가 99
21:43:21,075 INFO [org.jboss.as.process](Thread-8) xxxx012016으로 완료되었습니다. 종료 프로세스 컨트롤러
21:43:21,075 INFO [org.jboss.as.process] (Thread-8) xxxx012015: 모든 프로세스가 완료되었습니다. exiting

[Host Controller] ]) - 오류 설명: {"WFLYCTL0080: Failed services" => {"jboss.remoting.server.management" => "WFLYRMT0004: 이미 사용 중인 주소: bind 127.0.0.1:9999

 

Cause

위 오류는 Unisphere 포트가 다른 애플리케이션과 충돌한다는 것을 의미합니다.

Resolution

Unisphere for VMAX/PowerMax는 아래 포트에 대한 독점 액세스 권한으로 설치해야 합니다. 
  • https용 8443
  • SMAS_DB 3324
  • 8088, RCA용 8089, RT
  • Unisphere for VMAX 서버용 4447, 9990, 9999(편집할 수 없음)
    • 포트:9999는 서비스 내 통신으로 사용되며 일반적으로 MANAGEMENT_NATIVE라고 합니다.
  • ECOM용 5988/5989
  • 클라이언트/서버용 2707
  • 10123 for vWitness

이 문제를 해결하려면 위의 포트를 활용하는 애플리케이션을 식별하고 제거하십시오. 그런 다음 SMAS를 정상적으로 시작합니다.
일부 시나리오에서는 Unisphere를 다시 설치해야 할 수 있습니다.

다음은 이러한 충돌이 관찰된 애플리케이션 중 몇 가지입니다.
Splunk
CISCO
DPA(Dell EMC Data Protection Advisor)
AppSync

Article Properties


Affected Product

Unisphere for VMAX, Unisphere for PowerMax

Product

Unisphere for VMAX

Last Published Date

08 Sept 2023

Version

3

Article Type

Solution