Dell Networking: USB를 사용하여 N-Series 스위치에 펌웨어를 다운로드하는 방법
Summary: USB를 사용하여 Dell Networking N-Series 스위치에 펌웨어를 다운로드하는 방법
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
소개
이 문서에서는 USB를 사용하여 스위치에 펌웨어를 다운로드하는 절차에 대해 설명합니다.
USB를 사용하여 전환하기 위한 펌웨어 다운로드 단계:
참고: Dell Digital Locker 액세스 및 Dell Digital Locker에서 다운로드하는 방법에 대한 자세한 내용은 Dell Digital Locker에 액세스하는 방법을 참조하십시오.
1단계
펌웨어 파일(.stk 파일)을 USB 디바이스에 복사합니다.
참고: USB 디바이스가 FAT32 형식인지 확인합니다.
2단계
아래 명령을 입력하여 디바이스가 감지되었는지 확인합니다.
show usb device
참고: 일부 USB가 제대로 감지되지 않으므로 USB가 감지되지 않으면 다른 USB를 시도합니다.
샘플 출력
Console# show usb device Device Status.................................. Active Manufacturer................................... xxxxxxxxx Product Name................................... xxxxxxxxxx Device Serial Number........................... xxxxxxxxxxxxxxxxxxx Class Code..................................... 0x0000 Subclass Code.................................. 0x0000 Protocol....................................... 0x0000 Vendor ID...................................... xxxxxx Product ID..................................... xxxxxx USB Version Compliance......................... 2.0
3단계
USB 디바이스에서 스위치의 백업 파티션으로 펌웨어 파일을 복사합니다.
샘플 출력
console# copy usb://N4000v6.5.4.3.stk backup Transfer Mode.................................. Binary Data Type...................................... Code Destination Filename........................... backup Management access will be blocked for the duration of the transfer Are you sure you want to start? (y/n) y File transfer in progress. Management access will be blocked for the duration of the transfer. please wait... File contents are valid. Copying file to flash... File transfer operation completed successfully.
4단계
아래 명령을 입력하여 파일이 백업 파티션에 성공적으로 복사되었는지 확인합니다.
show version
샘플 출력
Console# show version Machine Description............... Dell Networking Switch System Model ID................... N4032F Machine Type...................... Dell Networking N4032F Serial Number..................... XXXXXXXXXXXXXXXXXXXXX Manufacturer...................... 0xbc00 Burned In MAC Address............. XXXX.XXXX.XXXX System Object ID.................. 1.3.6.1.4.1.674.10895.3044 CPU Version....................... XLP308H-B1 SOC Version....................... BCM56842_A1 HW Version........................ 3 CPLD Version...................... 17 unit active backup current-active next-active ---- ----------- ----------- -------------- -------------- 1 6.2.7.2 6.5.4.3 6.2.7.2 6.2.7.2
5단계
아래 명령을 입력하여 재부팅 후 백업 파티션을 활성 파티션으로 만듭니다.
boot system backup
샘플 출력
Console# boot system backup Activating image backup ...
6단계
아래 명령을 다시 입력하여 최신 펌웨어가 "next-active" 아래에 표시되는지 확인합니다.
show version
샘플 출력
Console# show version Machine Description............... Dell Networking Switch System Model ID................... N4032F Machine Type...................... Dell Networking N4032F Serial Number..................... XXXXXXXXXXXXXXXXXXX Manufacturer...................... 0xbc00 Burned In MAC Address............. XXXX.XXXX.XXXX System Object ID.................. 1.3.6.1.4.1.674.10895.3044 CPU Version....................... XLP308H-B1 SOC Version....................... BCM56842_A1 HW Version........................ 3 CPLD Version...................... 17 unit active backup current-active next-active ---- ----------- ----------- -------------- -------------- 1 6.2.7.2 6.5.4.3 6.2.7.2 6.5.4.3
7단계
현재 구성을 저장하고 스위치를 재부팅합니다. 스위치에 새 펌웨어 코드가 표시되어야 합니다.
8단계
펌웨어 요구 사항에 따라 부팅 코드 및 CPLD를 업그레이드합니다.
참고: Dell 지원에서 플랫폼 및 버전에 대한 업그레이드 가이드 및 릴리스 노트를 확인하여 부팅 코드, CPLD 또는 Xloader 업그레이드가 필요한지 확인하십시오.
Cause
필요 없음
Resolution
위 내용 참조
Affected Products
N Series, PowerSwitch E3200-ON Series, PowerSwitch N1100-ON Series, PowerSwitch N2000 Series, PowerSwitch N2100 Series, PowerSwitch N3000 Series, Dell EMC PowerSwitch N3000E-ON Series, Dell EMC PowerSwitch N3100 Series, Dell EMC Networking N3200-ON
, PowerSwitch N4000 Series, PowerConnect 8024, PowerConnect 8024F, PowerConnect 8100 Series
...
Products
PowerSwitch N1100-ON Series, PowerSwitch N1500 Series, PowerSwitch N2000 Series, PowerSwitch N2100 Series, PowerSwitch N2200-ON Series, PowerSwitch N3000 SeriesArticle Properties
Article Number: 000131978
Article Type: Solution
Last Modified: 28 Mar 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.