VMware: Udførelse af ikke-forstyrrende migrering med ESXi pRDM Microsoft-klyngemiljø i CAB-konfiguration (Cluster-Across-Boxes)

Summary: Udførelse af ikke-forstyrrende migrering med ESXi pRDM Microsoft-klyngemiljø i CAB-konfiguration (Cluster-Across-Boxes).

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Når du udfører ikke-forstyrrende migrering (NDM) med ESXi Pass-through Raw Device Mapping (pRDM) Microsoft-klyngemiljø i CAB-konfiguration (Cluster-Across-Boxes), antager værten/multistien, at genopdagede V3-stier stadig er registreret fra før annulleringen. I Microsoft-klyngemiljøet resulterer dette i symptomet NTFS-hændelse 57 og uventet failover for klyngeressourcer. Et andet problem er, hvor NDM-ændringer introduceres, før alle deltagende værter har haft mulighed for at genkende den første ændring (cutover). Dette kan resultere i tilfælde, hvor en skrivning kan afvises af både V2 og V3, og enheder markeres med permanent enhedstab (PDL) af VMware.

Cause

Dette problem opstår på grund af en mulig eksponering nedstrøms for gentagen tilføjelse/fjernelse af stier uden genscanning/oprydning af værten efter hvert trin.

Resolution

Ryd op i forældede/døde værtsstier ved at udføre en værtsscanningshandling efter en annullering, der er udstedt, og at alle deltagende værter har opdaget cutover-ændringen, før de kører en annullering/tilbageførsel.

Additional Information


Affected Products

VMware ESXi 6.7.X, VMware ESXi 7.x, VMware ESXi 8.x

Products

PowerEdge XR2, Poweredge C4140, PowerEdge C6420, PowerEdge FC640, PowerEdge M640, PowerEdge M640 (for PE VRTX), PowerEdge MX740C, PowerEdge MX840C, PowerEdge R240, PowerEdge R250, PowerEdge R340, PowerEdge R350, PowerEdge R440, PowerEdge R450 , PowerEdge R540, PowerEdge R550, PowerEdge R640, PowerEdge R6415, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R740, PowerEdge R740XD, PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R840, PowerEdge R940, PowerEdge R940xa, PowerEdge T140, PowerEdge T150, PowerEdge T340, PowerEdge T350, PowerEdge T440, PowerEdge T550, PowerEdge T640, PowerEdge XE2420, PowerEdge XE7420, PowerEdge XE7440 ...
Article Properties
Article Number: 000185021
Article Type: Solution
Last Modified: 07 Jan 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.