Solutions Enabler: symconfigure create mislukt wanneer de SG-waarde is opgegeven met een fout: Het opgegeven object bestaat niet

Summary: Poging om apparaten te maken met behulp van een syntaxis die vergelijkbaar is met: create dev count=1, size=32768 cyl, emulation=FBA, config=TDEV, sg=SG_NAME; Mislukt met fout: Het opgegeven object bestaat niet. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Ik probeer apparaten te maken met symconfigure maar dit mislukt met de fout:

symconfigure -sid xxx -cmd "create dev count=1, size=100, emulation=FBA, config=TDEV, sg=SG_NAME;" preview -nop
A Configuration Change operation is in progress. Please wait...

    Establishing a configuration change session...............Established.

    Error occurred while Defining change number 1:
    The specified object does not exist.
    Terminating the configuration change session..............Done.

The configuration change session has failed.



Het symapi-logboek toont:
 

1 EMC:SYMCONFIGURE           iSymConfigChangeSess Starting a remote CfgChg session for SID 0005979xxxxx, symapi V9.2-2631 (2.0) ucode 5978
Establishing session with Remote cfg srvr (0005979xxxxx)..Established.
Session ID   16806656 (0x01007300)
 1 EMC:SYMCONFIGURE           cfgValidateAddDevsTo Call to emcValidateAddDevsToStorGrp failed with status = 3596 (The specified object does not exist)
  SymConfigChange Define error in dfn 1:
  create dev count=1, size=100, emulation=FBA, config=TDEV, sg=SG_NAME;
  The specified object does not exist.
 1 EMC:SYMCONFIGURE           User Generated       The specified object does not exist.
Terminating session with configuration server.............Done.

De storagegroep is te zien in de "symsg list" command uitgang.

Cause

Dit probleem doet zich voor omdat de storagegroep een koppeling heeft met een snapshotbeleid. U kunt in de 'symsg show SG_NAME' uitvoer:

symsg -sid 63 show SG_NAME

Name: SG_NAME

   Symmetrix ID               : 0005979xxxxx
   Last updated at            : Thu Mar 31 13:30:03 2022
   Masking Views              : Yes
   FAST Managed               : Yes
   Service Level Name         : Optimized
   Workload                   : <none>
   SRP Name                   : SRP_1
   VP Saved (%)               : 74.5
   Compression Enabled        : No
   Compression Ratio          : N/A
   Host I/O Limit             : None
   Host I/O Limit MB/Sec      : N/A
   Host I/O Limit IO/Sec      : N/A
   Dynamic Distribution       : N/A
   Number of Gatekeepers      :    0

   Policies (1):
    {
    ---------------------------------------------------------------
                                                      Suspension
    Policy Name                       Type           SG   PSG   Pol
    ---------------------------------------------------------------
    Policy-10min                      Snapshot        -   Yes    No
    }


Er lijkt een conflict te zijn wanneer een snapshotbeleid wordt toegewezen aan de storagegroep. 

Resolution

Tijdelijke oplossing: Maak de apparaten zonder een sg=-waarde op te geven en voeg de apparaten vervolgens handmatig toe aan de storagegroep.

Affected Products

Solutions Enabler
Article Properties
Article Number: 000198023
Article Type: Solution
Last Modified: 14 Nov 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.