Solutions Enabler:指定 SG 值時,symconfigure 建立會失敗,並顯示錯誤:指定的物件不存在
Summary: 嘗試使用符號設定語法建立裝置,類似於: 創建開發計數=1,大小=32768個磁柱,模擬=FBA,配置=TDEV,sg=SG_NAME; 失敗並顯示錯誤:指定的物件不存在。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
嘗試建立具有符號設定的裝置,但失敗並顯示錯誤:
symconfigure -sid xxx -cmd "create dev count=1, size=100, emulation=FBA, config=TDEV, sg=SG_NAME;" preview -nop
A Configuration Change operation is in progress. Please wait... Establishing a configuration change session...............Established. Error occurred while Defining change number 1: The specified object does not exist. Terminating the configuration change session..............Done. The configuration change session has failed.
symapi 記錄顯示:
1 EMC:SYMCONFIGURE iSymConfigChangeSess Starting a remote CfgChg session for SID 0005979xxxxx, symapi V9.2-2631 (2.0) ucode 5978 Establishing session with Remote cfg srvr (0005979xxxxx)..Established. Session ID 16806656 (0x01007300) 1 EMC:SYMCONFIGURE cfgValidateAddDevsTo Call to emcValidateAddDevsToStorGrp failed with status = 3596 (The specified object does not exist) SymConfigChange Define error in dfn 1: create dev count=1, size=100, emulation=FBA, config=TDEV, sg=SG_NAME; The specified object does not exist. 1 EMC:SYMCONFIGURE User Generated The specified object does not exist. Terminating session with configuration server.............Done.
儲存群組顯示在 "symsg list" command 輸出。
Cause
發生此問題的原因是存儲組與快照策略相關聯。您可以看到 'symsg show SG_NAME' 產量:
symsg -sid 63 show SG_NAME
Name: SG_NAME
Symmetrix ID : 0005979xxxxx
Last updated at : Thu Mar 31 13:30:03 2022
Masking Views : Yes
FAST Managed : Yes
Service Level Name : Optimized
Workload : <none>
SRP Name : SRP_1
VP Saved (%) : 74.5
Compression Enabled : No
Compression Ratio : N/A
Host I/O Limit : None
Host I/O Limit MB/Sec : N/A
Host I/O Limit IO/Sec : N/A
Dynamic Distribution : N/A
Number of Gatekeepers : 0
Policies (1):
{
---------------------------------------------------------------
Suspension
Policy Name Type SG PSG Pol
---------------------------------------------------------------
Policy-10min Snapshot - Yes No
}
將快照策略分配給儲存組時似乎存在衝突。
Resolution
因應措施:在未指定 sg= 值的情況下建立裝置,然後手動將裝置新增至儲存群組。
Affected Products
Solutions EnablerArticle Properties
Article Number: 000198023
Article Type: Solution
Last Modified: 14 Nov 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.