Dell NativeEdge: PowerEdge NativeEdge Endpoint se bloquea en el arranque inicial
Summary: En este artículo, se describen los pasos que se deben seguir si un terminal PowerEdge NativeEdge no se incorpora y se bloquea después del arranque inicial en PowerEdge LifeCycle Controller. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Durante la incorporación, si un NativeEdge Endpoint de PowerEdge se redirige al menú de PowerEdge Lifecycle Controller, esos dispositivos no se incorporan sin intervención.
Cause
En ocasiones, es posible que un terminal PowerEdge NativeEdge intente arrancar en PowerEdge LifeCycle Controller en su lugar.
Este problema solo se aplica a los terminales PowerEdge NativeEdge.
Este problema solo se aplica a los terminales PowerEdge NativeEdge.
Resolution
Comuníquese con el soporte de Dell NativeEdge mediante una solicitud de servicio para resolver este problema y mencione el número de este artículo.
Affected Products
NativeEdge Solutions, NativeEdgeArticle Properties
Article Number: 000216723
Article Type: Solution
Last Modified: 19 Mar 2024
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.