PowerStore:如何變更磁碟區節點親和性

Summary: 本知識庫文章提供如何變更磁碟區節點親和性的指導。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

節點親和性可定義為磁碟區提供優化 I/O 的節點。
PowerStoreOS v2.1 推出磁碟區的動態節點親和性。這可讓PowerStore 根據系統的效能自動變更磁碟區的節點親和性。

注意:手動將磁碟區設定為 Preferred_Node_A/B 可防止 PowerStore 根據系統效能變更節點親和性。
只有在 Dell 技術支援或工程部門建議時,才應手動變更磁碟區節點親和性。隨機變更此設定可能會導致效能不佳。

此功能無法在 PowerStore Manager 使用者介面中變更,但可使用 PowerStore CLI (PSTCLI) 進行變更。


檢查目前的節點親和性設定

使用 PowerStore Manager 使用者介面

若要查看目前的設定,請檢查儲存磁碟區底下>的 PowerStore Manager 使用者介面。

如果您在磁碟區表格中看不到節點親和性欄,請使用「顯示/隱藏表格」欄來新增:
image.png
 

使用 PowerStore CLI (PSTCLI)

列出所有磁碟區:
pstcli -d cluster_ip -u admin -p admin_password volume show -select name,node_affinity

或僅列出一個磁碟區:
pstcli -d cluster_ip -u admin -p admin_password volume -name your_volume show
必須變更以綠色顯示的欄位以符合您的資訊。  


變更節點親和性

使用 PowerStore CLI (PSTCLI)

若要變更節點親和性:
pstcli -d cluster_ip -u admin -p admin_password volume -name your_volume set -node_affinity Preferred_Node_X


磁碟區可能的親和性值會顯示在此清單中。只有 粗體 顯示的值才能使用 PSTCLI 手動設定。
System_Select_At_Attach 第一次連接磁碟區時,會指派親和性。 可手動設定
System_Selected_Node_A 系統選取節點 A 作為磁碟區的優化 I/O 路徑。 保留供系統使用
System_Selected_Node_B 系統選取節點 B 作為磁碟區的優化 I/O 路徑。 保留供系統使用
Preferred_Node_A 節點 A 設定為磁碟區的優化 I/O 路徑。 可手動設定
Preferred_Node_B 節點 B 會設定為磁碟區的優化 I/O 路徑。 可手動設定

如果磁碟區已Preferred_Node_A/B 設定,且您希望系統再次管理節點親和性,請將磁碟區設定為System_Select_At_Attach。
如果磁碟區有作用中的主機對應,它會自動變更為System_Selected_Node_A或System_Selected_Node_B。

Affected Products

PowerStore, PowerStore 1000X, PowerStore 1000T, PowerStore 3000X, PowerStore 3000T, PowerStore 5000X, PowerStore 5000T, PowerStore 500T, PowerStore 7000X, PowerStore 7000T

Products

PowerStore Expansion Enclosure, PowerStore Rack, PowerStore 9000X, PowerStore 9000T
Article Properties
Article Number: 000194291
Article Type: How To
Last Modified: 12 Apr 2023
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.