VxRail: Zurücksetzen des Root-Kennworts für iDRAC
Summary: VxRail: Anleitung zum Zurücksetzen des Root-Kennworts des iDRAC.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Zurücksetzen der Root-PW von iDRAC:
1. Stellen Sie eine SSH-Verbindung zum Node
2 her. Überprüfen Sie die ID des Root-Nutzers.
3. Setzen Sie das neue Kennwort mit dem Stammverzeichnis von iDRAC zurück.
Zum Beispiel TestCalvin als neues PW festlegen
1. Stellen Sie eine SSH-Verbindung zum Node
2 her. Überprüfen Sie die ID des Root-Nutzers.
/opt/vxrail/tools/ipmitool user list 1 ID Name Callin Link Auth IPMI Msg Channel Priv Limit 1 true false false NO ACCESS 2 root true true true ADMINISTRATOR 3 true false false NO ACCESS 4 true false false NO ACCESS 5 true false false NO ACCESS 6 true false false NO ACCESS 7 true false false NO ACCESS 8 true false false NO ACCESS 9 true false false NO ACCESS 10 true false false NO ACCESS 11 true false false NO ACCESS 12 true false false NO ACCESS 13 true false false NO ACCESS 14 true false false NO ACCESS 15 vxpsvc true false false ADMINISTRATOR 16 PTAdmin true false false NO ACCESS
3. Setzen Sie das neue Kennwort mit dem Stammverzeichnis von iDRAC zurück.
/opt/vxrail/tools/ipmitool user set password <Root user ID> <NEW PASSWORD>
Zum Beispiel TestCalvin als neues PW festlegen
[root@node-02:~] /opt/vxrail/tools/ipmitool user set password 2 TestCalvin Set User Password command successful (user 2)
Affected Products
iDRAC9Products
VxRail SoftwareArticle Properties
Article Number: 000013629
Article Type: How To
Last Modified: 06 Dec 2024
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.