Dell Unity: Jak zakázat protokol SMB2 na serveru CIFS NAS.

Summary: 1. Zakažte protokol SMB2 na serveru CIFS NAS. 2. Protokol SMB3 povolte pouze na serveru CIFS NAS.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Od verze Unity OE 5.4 byl zaveden nový parametr cifs.smb2.smb3only pro povolení nebo zakázání protokolu SMB2 na serveru CIFS NAS.

1. Je-li nastavena hodnota cifs.smb2.smb3only=0 (výchozí), protokol SMB2 je na serveru CIFS NAS povolen. K serveru CIFS NAS mohou přistupovat klienti SMB2 a SMB3.

root@vsa0 spa:/cores/service/user# svc_nas nas01 -param -f cifs -i smb2.smb3only -v

nas01 :
name                    = smb2.smb3only
facility_name           = cifs
default_value           = 0
current_value           = 0
configured_value        = 0
param_type              = NAS server
user_action             = none
change_effective        = immediate
range                   = (0,1)
description             = Specifies if SMB2 2XX dialects are disabled.

detailed_description
This parameter allows the disabling of SMB2 2XX dialects (SMB2.0/SMB2.0.2, SMB2.1 and SMB2.2). SMB2 is not disabled by default, as the default value is set to 0. Note: The SMB clients must disconnect all the SMB server shares in order to negotiate the appropriate dialect after modifying this parameter.

2. Je-li nastavena hodnota cifs.smb2.smb3only=1 (výchozí), protokol SMB2 je na serveru CIFS NAS zakázán. K serveru CIFS NAS může přistupovat pouze klient SMB3.

root@vsa0 spa:/cores/service/user# svc_nas nas01 -param -f cifs -i smb2.smb3only -v

nas01 :
name                    = smb2.smb3only
facility_name           = cifs
default_value           = 0
current_value           = 0
configured_value        = 0
param_type              = NAS server
user_action             = none
change_effective        = immediate
range                   = (0,1)
description             = Specifies if SMB2 2XX dialects are disabled.

detailed_description
This parameter allows the disabling of SMB2 2XX dialects (SMB2.0/SMB2.0.2, SMB2.1 and SMB2.2). SMB2 is not disabled by default, as the default value is set to 0. Note: The SMB clients must disconnect all the SMB server shares in order to negotiate the appropriate dialect after modifying this parameter.

3. Jak upravit cifs.smb2.smb3only

root@vsa0 spa:/cores/service/user# svc_nas nas01 -param -f cifs -m smb2.smb3only -v 1

nas01 : done

Poznámka: Jedná se o parametr na úrovni serveru NAS, který se po změně projeví okamžitě.

 

 

 

Affected Products

Dell EMC Unity Family |Dell EMC Unity All Flash

Products

Dell EMC Unity Hybrid, Dell Unity Operating Environment (OE), Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
Article Properties
Article Number: 000313042
Article Type: How To
Last Modified: 29 Apr 2025
Version:  1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.