Dell Unity: Wyłączanie protokołu SMB2 na serwerze CIFS NAS.

Summary: 1. Wyłącz protokół SMB2 na serwerze CIFS NAS. 2. Włącz protokół SMB3 tylko na serwerze CIFS NAS.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

W Unity OE 5.4 wprowadzono nowy parametr cifs.smb2.smb3only w celu włączenia/wyłączenia protokołu SMB2 na serwerze CIFS NAS.

1. Po ustawieniu cifs.smb2.smb3only=0 (ustawienie domyślne) protokół SMB2 jest włączony na serwerze CIFS NAS. Dostęp do serwera CIFS NAS można uzyskać za pomocą klienta SMB2 i klienta SMB3.

root@vsa0 spa:/cores/service/user# svc_nas nas01 -param -f cifs -i smb2.smb3only -v

nas01 :
name                    = smb2.smb3only
facility_name           = cifs
default_value           = 0
current_value           = 0
configured_value        = 0
param_type              = NAS server
user_action             = none
change_effective        = immediate
range                   = (0,1)
description             = Specifies if SMB2 2XX dialects are disabled.

detailed_description
This parameter allows the disabling of SMB2 2XX dialects (SMB2.0/SMB2.0.2, SMB2.1 and SMB2.2). SMB2 is not disabled by default, as the default value is set to 0. Note: The SMB clients must disconnect all the SMB server shares in order to negotiate the appropriate dialect after modifying this parameter.

2. Po ustawieniu opcji cifs.smb2.smb3only=1 (ustawienie domyślne) protokół SMB2 jest wyłączony na serwerze CIFS NAS. Dostęp do serwera NAS CIFS jest możliwy tylko dla klienta SMB3.

root@vsa0 spa:/cores/service/user# svc_nas nas01 -param -f cifs -i smb2.smb3only -v

nas01 :
name                    = smb2.smb3only
facility_name           = cifs
default_value           = 0
current_value           = 0
configured_value        = 0
param_type              = NAS server
user_action             = none
change_effective        = immediate
range                   = (0,1)
description             = Specifies if SMB2 2XX dialects are disabled.

detailed_description
This parameter allows the disabling of SMB2 2XX dialects (SMB2.0/SMB2.0.2, SMB2.1 and SMB2.2). SMB2 is not disabled by default, as the default value is set to 0. Note: The SMB clients must disconnect all the SMB server shares in order to negotiate the appropriate dialect after modifying this parameter.

3. Jak zmodyfikować plik cifs.smb2.smb3only

root@vsa0 spa:/cores/service/user# svc_nas nas01 -param -f cifs -m smb2.smb3only -v 1

nas01 : done

Uwaga: Jest to parametr na poziomie serwera NAS i gdy zostanie zmieniony, zacznie obowiązywać natychmiast.

 

 

 

Affected Products

Dell EMC Unity Family |Dell EMC Unity All Flash

Products

Dell EMC Unity Hybrid, Dell Unity Operating Environment (OE), Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
Article Properties
Article Number: 000313042
Article Type: How To
Last Modified: 29 Apr 2025
Version:  1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.