MFE ConGroup: Snap Error is Received when Creating Snapshots from Standard Devices
Summary: Snap error is received when creating snapshots from standard devices.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Snap error when creating snapshots from standard devices.
EQCA315E ERROR RETURNED FROM CREATE SYSCALL, RC=000800CE CE = NO DIRECTOR FOR OPERATION
Cause
This is due to a software issue.
Resolution
Permanent Fix:
- For Mainframe Enablers 10.0.0, PTF SCA0008 has been developed to correct the issue. It is available to download from Dell Technologies Online Support.
Additional Information
PTF Cover Letter
++PTF(SCA0008) REWORK(2023009) .
++VER(Z038) FMID(SCGPA00)
PRE(
SCA0001 SCA0002
)
/*
*-------------------------------------------------------------
* PROBLEM DESCRIPTION(S):
* ------------------------------------------------------------
* PROBLEM FIXED: MFE-16234
* USERS AFFECTED: Snap users for STD devices
* PROBLEM DESCRIPTION: BCV query done erroneously
* DESCRIPTION DETAIL:
*
* When LOCAL_SPLIT_PROTOCOL=SNAP is specified, controllers
* should not be queried for BCV devices. If the controller
* is Juniper or higher, this could result in false error
* messages.
*
* PROBLEM RESOLUTION:
*
* If LOCAL_SPLIT_PROTOCOL=BCV is not specified, do not do
* BCVQUERY.
*
* MODULES: ECGMONT
* CGRPUTIL
*
* ------------------------------------------------------------
* SCA0008 9 Jan 2023 13:47:22
* ------------------------------------------------------------
* OPT Summary
* The following OPT was addressed by this PTF:
*
* MFE-16234
*
*-------------------------------------------------------------
Affected Products
Mainframe EnablersArticle Properties
Article Number: 000214995
Article Type: Solution
Last Modified: 08 Jan 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.