Microsoft Windows: Cómo recopilar el rendimiento de todos los nodos de un clúster con PowerShell

Summary: En este artículo, se explica cómo recopilar registros de rendimiento de todos los nodos de un clúster con PowerShell.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Ejecute powershell como administrador y, a continuación, copie y pegue el siguiente comando:

Get-ClusterNode).Name | % {Invoke-Command -ComputerName $_ -ScriptBlock {"$(logman create counter FULL-Short -o "c:\diag\%computername%_PerfLog-Short.blg" -f bincirc -v mmddhhmm -max 500 -c "\Cache\*" "\Cluster CSV File System(*)\*" "\Cluster CSV Volume Cache(*)\*" "\Cluster CSV Volume Manager(*)\*" "\Cluster CSVFS(*)\*" "\Cluster Storage Cache Stores(*)\*" "\Cluster Storage Hybrid Disks(*)\*" "\Hyper-V Hypervisor Logical Processor(*)\*" "\Hyper-V Hypervisor Partition(*)\*" "\Hyper-V Hypervisor Root Partition(*)\*" "\Hyper-V Hypervisor Root Virtual Processor(*)\*" "\Hyper-V Hypervisor Virtual Processor(*)\*" "\Hyper-V Virtual IDE Controller (Emulated)(*)\*" "\Hyper-V Virtual Storage Device(*)\*" "\LogicalDisk(*)\*" "\Memory\*" "\Network Adapter(*)\*" "\Paging File(*)\*" "\PhysicalDisk(*)\*" "\Process(*)\*" "\Processor Information(*)\*" "\RDMA Activity(*)\*" "\ReFS(*)\*" "\SMB Client Shares(*)\*" "\SMB Direct Connection(*)\*" "\SMB Server\*" "\SMB Server Sessions(*)\*" "\SMB Server Shares(*)\*" "\Storage Spaces Drt(*)\*" "\Storage Spaces Virtual Disk(*)\*" "\Storage Spaces Write Cache(*)\*" "\System\*" -si 00:00:02)"+"$(logman start Full-Short)"}}


Esto crea el contador perfmon en cada nodo del clúster e inicia el perfmon Registro. Una vez que haya pasado el tiempo suficiente para experimentar el problema de rendimiento, detenga el rendimiento con el siguiente comando:

#Stop logmasn trace
(Get-ClusterNode).Name | % {Invoke-Command -ComputerName $_ -ScriptBlock {"$(logman stop Full-Short)"}}



Cuando se hayan recopilado todos los datos de rendimiento necesarios, elimine el contador de rendimiento con el siguiente comando:

#Remove logman trace
(Get-ClusterNode).Name | % {Invoke-Command -ComputerName $_ -ScriptBlock {"$(logman Delete Full-Short)"}}


Si se requiere una mayor recopilación de registros: 
wpr -start CPU -start FileIO -start GeneralProfile -start MiniFilter     
(For 10 seconds when issue is happening.)
wpr -stop C:\PerfLogs\Admin\wpr.etl

Affected Products

Microsoft Windows Server 2016, Microsoft Windows Server 2019, Microsoft Windows Server 2022, Microsoft Windows 2008 Server R2, Microsoft Windows 2008 Server Service Pack 2, Microsoft Windows 2012 Server, Microsoft Windows 2012 Server R2

Products

Microsoft Hyper-V™ Server 2008, Microsoft Windows Small Business Server 2008, Microsoft Windows Small Business Server 2011 Essentials, Microsoft Windows Small Business Server 2008, Microsoft Windows Essential Business Server 2008
Article Properties
Article Number: 000193585
Article Type: How To
Last Modified: 05 Sept 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.