PowerStore：主机连接指南中用于设置 noop 间隔参数的 ESXcli 命令对于 ESXi 7.x 及更高版本不正确
Summary: VMware 将参数名称从“Noopinterval”更改为“NoopOutInterval”，以更好地符合行业标准。此参数更改是在他们从 vCLI EOL 过渡到 esxcli 和 7.x ESXI 中的较新 API 调用方法期间进行的。 https://vdc-download.vmware.com/vmwb-repository/dcr-public/92f8e15f-bf40-40f1-ba99-71ce1504eb77/6d9aeb6c-f524-419d-b6bc-2239a999b9d5/doc/cli_manage_iscsi_storage.7.8.html 使用旧参数时报的错误为“无法设置参数：参数键无效” ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
无法设置参数：使用“NoopInterval”而不是“NoopOutInterval”时，参数键无效
Cause
在 ESXi 7.x 及更高版本中，VMware 将参数的名称从“NoopInterval”更改为“NoopOutInterval”。
Resolution
在 ESXi 7.x 及更高版本中，使用“NoopOutInterval”，如下所示：
esxcli iscsi adapter param set -A adapter_name -k NoopOutInterval -v value_in_sec示例：
esxcli iscsi adapter param set -A vmhba66 -k NoopOutInterval -v 5提醒：该文档将在未来版本中更正。
Affected Products
PowerStore, PowerStore 1000X, PowerStore 1000T, PowerStore 1200T, PowerStore 3000X, PowerStore 3000T, PowerStore 3200T, PowerStore 5000X, PowerStore 5000T, PowerStore 500T, PowerStore 5200T, PowerStore 7000X, PowerStore 7000T, PowerStore 9000X
, PowerStore 9000T, PowerStore 9200T
...
Products
VMware ESXi 7.xArticle Properties
Article Number: 000207349
Article Type: Solution
Last Modified: 16 May 2026
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.