Cisco: Kernel-Panik durch RCU-Stillstand beim Zugriff auf das Flash-Dateisystem
Summary: Ein MDS Supervisor-4-Modul wird ohne Warnung zurückgesetzt.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Ein MDS Supervisor-4-Modul wird beim Zugriff auf ein Flash-Dateisystem zurückgesetzt.
Das show system reset-reason Zeigt den Grund als Kernel-Fehler an:
Reason: Kernel Panic
Der show system internal kenel nvram-messages previous hat die folgenden Meldungen: 1.Eine Warnung für "d_shrink_del" 2. Signaturzeile vom Typ "rcu_sched selbsterkannter Stillstand" und der Wert "t =" ist 2100 oder höher (CPU-Nummer und PID sind nicht relevant)
[850772.912879 <3>] WARNING: CPU: 3 PID: 11665 at ... d_shrink_del+0x30/0x73()
...
[850793.913314 <3>] INFO: rcu_sched self-detected stall on CPU { 3} (t=2101 jiffies g=12138660 c=12138659 q=39875)
...
[850793.917818 <3>] Kernel panic - not syncing: RCU self stall taking too long
Cause
Cisco-Fehler CSCwj03301
Dieses Problem tritt möglicherweise nur für Cisco MDS NX-OS-Versionen vor Version 9.4(1) auf.
Dieses Problem tritt möglicherweise nur auf Cisco MDS Supervisor-4-Plattformen auf.
Resolution
Lösung:
Upgrade auf NX-OS-Code 9.4.1 oder höher
Affected Products
Connectrix MDS-Series, Connectrix MDS-9706, Connectrix MDS-9706-V2, Connectrix MDS-9710, Connectrix MDS-9710-V2, Connectrix MDS-9718, Connectrix MDS-9718-V3, Connectrix MDS-Series Firmware 8.X, Connectrix MDS-Series Firmware 9.XArticle Properties
Article Number: 000222207
Article Type: Solution
Last Modified: 20 Feb 2024
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.