RecoverPoint voor VM's: 5.3 SP4 Patch 1-ondersteuning voor UEFI Secure Boot

Summary: RecoverPoint for Virtual Machines (VM's) 5.3 SP4 patch 1 (5.3.4.1) biedt standaard geen ondersteuning voor Unified Extensible Firmware Interface (UEFI) Secure Boot. In dit artikel worden de beperkingen en beschikbare opties uitgelegd. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

De RecoverPoint for VMs 5.3 SP4 Patch 1 Splitter vSphere Installation Bundle (VIB) kan niet worden geïnstalleerd wanneer Secure Boot is ingeschakeld.

Bij het testen van Secure Boot met de splitterinstallatie wordt een fout weergegeven:

[root@vApp13-esx-100:~] /usr/lib/vmware/secureboot/bin/secureBoot.py -c
Secure boot CANNOT be enabled
: Failed to verify signatures of the following vib(s): [RP-Splitter]. All tardisks validated. All acceptance levels validated


Fout op de ESXi-host (/var/run/log/esxupdate.log) bij het implementeren van de splitter: 

Could not stage image profile '(Updated) ESXi-6.5.0-2018050xxx-standard': ('EMC_Recoverpoint_bootbank_RP-Splitter_RPESX-00.5.3.4.1.0.m.184.000', "('EMC_Recoverpoint_bootbank_RP-Splitter_RPESX-00.5.3.4.1.0.m.184.000', 'The VIB EMC_Recoverpoint_bootbank_RP-Splitter_RPESX-00.5.3.4.1.0.m.184.000 does not contain a signature.')")"" reporting on the VC tasks. 


De installatie van RecoverPoint for VMs 5.3 SP4 patch 1 mislukt bij 53% als de hosts zich in de modus Veilig opstarten bevinden.
De fout in Deployment Manager:

Installation has failed. Review the error messages below to identify the cause.

Installing vRPAs cluster, and verifying all vRPAs are attached. (x)
could not deploy ESX splitter.

Cause

De RecoverPoint for VMs 5.3 SP4 Patch 1 splitter VIB - RPESX-00.5.3.4.1.0.m.184.000 - is niet ondertekend.
Secure Boot wordt niet ondersteund met deze splitterversie.

Resolution

De RecoverPoint for VMs 5.3 SP4 Patch 1 splitter VIB - RPESX-00.5.3.4.1.0.m.184.000 - is niet ondertekend en biedt geen ondersteuning voor Secure Boot.

  • Voor vSphere 8.0-omgevingen met RecoverPoint for VMs 5.3 SP4 patch 1 - Secure Boot wordt niet ondersteund
  • Voor vSphere 7.0.x omgevingen met RecoverPoint for VMs 5.3 SP4 patch 1 - Secure Bootwordt ondersteund met de RecoverPoint for VMs 5.3.4.0 splitter.


Tijdelijke oplossing voor vSphere 8.0.x:

  • Schakel Secure Boot uit op ESXi-hosts.
  • Installeer de RecoverPoint for VMs 5.3 SP4 Patch 1 Splitter met de optie --no-sig-check :
esxcli software vib install -v /<Full_path_to_vib_file> --no-sig-check


Tijdelijke oplossingen voor oudere vSphere-releases:
Voor vSphere 6.x en vSphere 7.0.x vSphere omgevingen volgt u een van deze opties:


Zie pagina 29 in de implementatiehandleiding, het gedeelte De splitter installeren met het VIB-installatieprogramma van RecoverPoint voor VM's.

Additional Information

Dit geldt ook voor RecoverPoint for VMs 5.3 SP3 Patch 3 VIB - EMC_bootbank_RP-Splitter_RPESX-00.5.3.3.3.0.m.176.000.vib.

RecoverPoint for VMs 6.0.x met VMware vSphere Application Programming Interfaces (APIs) for I/O Filtering (VAIO) Splitter blijft Secure Boot ondersteunen.

Affected Products

RecoverPoint for Virtual Machines
Article Properties
Article Number: 000225918
Article Type: Solution
Last Modified: 20 Dec 2025
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.