NetWorker Authentication Proxy Port must be part of the service port range
Summary: Starting with NetWorker 19.10. nsrports command requires the auth_proxyd port to be part of the service port range.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
The auth_proxy service port is set in the NetWorker NSR resource.
When you configure a custom NetWorker service port range, you might see this error message:
nsradmin> p type:NSR
type: NSR;
Authentication Proxy port: 7999; <=========== Default value...
When you configure a custom NetWorker service port range, you might see this error message:
# nsrports -S 7937-7940 12345-54321
205589:nsrexecd: Configured Auth proxy port value 7999 of the NSR resource doesn't fall within any defined service port range '7937-7940, 12345-54321'
Cause
NW 19.10 made it a requirement to add the port for the Authentication proxy service to the service port range.
Previous releases issued only a warning in the daemon log.
Previous releases issued only a warning in the daemon log.
Resolution
The configured Authentication Proxy port must be part of the service port range.
Example:
Example:
# nsrports -S 7937-7940 12345-54321 7999
# nsrports
Service ports: 7937-7940 12345-54321 7999
Connection ports: 0-0 The Authentication proxy port 7999 is used exclusively by the auth_proxy daemon.Products
NetWorker Family, NetWorker, NetWorker SeriesArticle Properties
Article Number: 000222617
Article Type: Solution
Last Modified: 01 Mar 2024
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.