Dell Automation Platform: NativeEdge-resultaatknooppunt FW is onbekend voor PowerEdge met HBA355i
Summary: De firmwarebundel voor het NativeEdge-resultaatknooppunt wordt onbekend weergegeven voor PowerEdge systemen die een HBA355i bevatten.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
In de Dell Automation Platform Orchestrator wordt onder Hardware-eigenschappen van Inventarisinfrastructuur >> [knooppuntnaam] >> bij de firmwarebundelversie Onbekend of de onjuiste versie weergegeven nadat de juiste firmwarebundel is toegepast.
In dit geval is de node een XR5610. De node heeft een HBA355i als schijfcontroller.
Cause
De NativeEdge-firmwarebundels voor 4.1 en 4.2 bevatten geen HBA355i-firmwarerelease. Dit veroorzaakt het onbekende bericht in de gebruikersinterface (UI)
Resolution
Open een serviceaanvraag (SR) bij Dell Support voor hulp bij het oplossen van dit probleem.
Additional Information
Affected Products
Dell Automation Platform, Dell Distributed Private Cloud, Dell Automation Platform Components, NativeEdgeArticle Properties
Article Number: 000464428
Article Type: Solution
Last Modified: 03 Jul 2026
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.