PowerStoreOS 5.0.0.x 패치 릴리스 노트
Summary: 이 문서에서는 PowerStoreOS의 패치 릴리스에서 해결된 문제에 대해 설명합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
이러한 패치 릴리스와 관련된 환경 및 시스템 요구 사항, 설치 또는 업데이트 고려 사항은 상위 릴리스와 동일합니다. 자세한 내용은 PowerStore Info Hub에서 Dell PowerStoreOS 5.0.0.0 릴리스 노트를 참조하십시오.
릴리스 개정 내역
| 릴리스 | 설명 |
| 5.0.0.1 |
|
| 5.0.0.0 |
|
PowerStoreOS 5.0.0.1(빌드: 2755744)
해결된 문제
| 문제 ID | 설명 |
| PSSLDF-83448 | PowerStoreOS 4.4.0.0으로 NDU(Non-Disruptive Upgrade)를 수행한 후 NDU 전에 생성된 예약된 스냅샷이 다음 복제 세션 중에 삭제될 수 있습니다. |
| PSSLDF-82246 | PowerStoreOS 5.0.0.0을 실행하는 PowerStore 500, 1200, 3200, 5200 및 9200 어플라이언스에서는 STIG 모드를 활성화할 수 없습니다. |
제한 사항
| 기능 영역 | 설명 |
| 설치 및 업그레이드 | PowerStoreOS 5.0.0.1로 업그레이드한 후 파일 메트로 복제 세션에서 재보호 작업을 수행하지 못할 수 있습니다. 파일 메트로 복제를 사용 중이거나 사용할 계획인 경우 PowerStoreOS 5.0.0.1로 업그레이드하지 마십시오. |
| 설치 및 업그레이드 | STIG 모드에서 실행 중인 1세대 어플라이언스가 있거나 1세대 어플라이언스를 PowerStore 5.x로 업그레이드하고 나중에 STIG 모드를 활성화하려는 경우 Dell에 문의하여 지원을 받으십시오. |
업그레이드 패키지
PowerStore 클러스터에서 자동 다운로드가 활성화되지 않은 경우 Dell Technologies 지원 사이트에서 PowerStore 업그레이드 패키지를 다운로드합니다.
지원 사이트에 있는 업그레이드 패키지의 이름은 PowerStore T OS Upgrade 5.0.0.1-2755744이고 다운로드 가능한 업그레이드 패키지의 파일 이름은 다음과 같습니다. PowerStoreT-5.0.0.1-2755744-retail.tgz.bin.
PowerStoreOS 5.0.0.0(빌드: 2752020)
PowerStore Info Hub에서 Dell PowerStoreOS 5.0.0.0 릴리스 노트를 참조하십시오.
Affected Products
PowerStore, PowerStore 1000T, PowerStore 1200T, PowerStore 1500, PowerStore 3000T, PowerStore 3200Q, PowerStore 3200T, PowerStore 5000T, PowerStore 500T, PowerStore 5200Q, PowerStore 5200T, PowerStore 5500, PowerStore 7000T, PowerStore 9000T
, PowerStore 9200T, PowerStore 9500
...
Article Properties
Article Number: 000489647
Article Type: How To
Last Modified: 24 Jul 2026
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.