AppSync:無法掛接 XIO 磁碟區並顯示錯誤 -「obj_identifier_not_unique」
Summary: 掛接失敗,因為 LUN 因 XIO 錯誤狀況而無法對應至陣列。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
掛接位於 XtremIO 儲存裝置上的副本失敗,並出現下列錯誤。
服務方案事件:
在掛接主機 <掛接主機上掛接檔案系統 掛接主機名稱>。
遮罩掛接主機的目標快照時發生錯誤。檢查所有後端陣列的連線能力狀態。
服務計劃名稱>的<掛接複製階段已完成,但發生錯誤
伺服器記錄:
遮罩掛接主機的目標快照時發生錯誤。檢查所有後端陣列的連線能力狀態。
服務計劃名稱>的<掛接複製階段已完成,但發生錯誤
10-01-2019 07:31:28.519 錯誤 [EJB default - 5] [com.emc.archway.commands.genericstorage.MountMixedArraySnapshotCommandBean] [AS Server Name] [<] 338616ba-15cc-4f61-8505-8047a3d8ff79->>>掛接失敗,出現錯誤 com.emc.archway.errorMessages.XIORESTException:>XMS <XMS IP> 的 REST 作業失敗,適用於 REST 作業:POST /api/json/v2/types/lun-maps。
XMS 稽核記錄:
2019-10-01 07:31:27,266: [2128:AFE7]使用者:admin,命令:map_lun,引數:{vol_obj_id=[“”, “<快照名稱>”, “0”], lun=無, tg_obj_id=[“”, “”, “1”], ig_obj_id=[“”, “<截圖>”, “0”], sys_id=[“”, 截圖>“, ”<0“]}
2019-10-01 07:31:27,496:[2128:9f8d] 使用者:管理員,命令:map_lun,失敗:obj_identifier_not_unique
2019-10-01 07:31:27,496:[2128:9f8d] 使用者:管理員,命令:map_lun,失敗:obj_identifier_not_unique
Cause
此問題是由 XtremIO 管理伺服器上的錯誤狀況所造成,如 KB 文章 533777 中所述。
Resolution
需要 XtremIO 技術支援部門的協助才能解決此問題。
在 XtremIO 產品下向 Dell EMC 開立服務要求,並參閱本文 ID 和文章 533777。
在 XtremIO 產品下向 Dell EMC 開立服務要求,並參閱本文 ID 和文章 533777。
Affected Products
AppSyncProducts
AppSyncArticle Properties
Article Number: 000168362
Article Type: Solution
Last Modified: 19 Sept 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.