ECS: xDoctor: RAP081: Tüm NTP sunucuları senkronizasyon için uygun DEĞİLDİR

Summary: xDoctor, Ağ Zaman Protokolü (NTP) sunucularının senkronizasyon için uygun olmadığını, ancak manuel olarak kontrol edildiğinde herhangi bir sorun bulunmadığını bildiriyor.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

NTP sunucusunun saati senkronize etme özelliği olup olmadığı test edilirken, sunucunun düştüğünü gösterir. Ancak komutu tekrar çalıştırdığınızda, sunucunun saati senkronize ettiğini gösterir.

----------------------------------------------------------------------
WARNING - One or more NTP servers are NOT suitable for synchronization
----------------------------------------------------------------------
Node      = Nodes
Extra     = {"Nodes": ["169.254.1.1", "169.254.1.2", "169.254.1.3", "169.254.1.4"]}
Timestamp = 2025-11-21_151945
PSNT      = APM00xxxxxxxxx @ 4.8-106.1


1- Listelenen düğümlerin her birindeki NTP Sunucularının listesini alın:
Komut:

# getrackinfo -r | grep NTP

Örneğin:

admin@node1:~> getrackinfo -r | grep NTP
        NTPServer =  xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx

 

2- Saati senkronize etme özelliğinin olup olmadığını test edin. 

Komut:

# sudo ntpdate -p 2 -d <NTP IP Address / NTP FQDN>
or
# sudo ntpdate -p 2 -d `getrackinfo -r | grep NTP |grep -oP "(?:[0-9]{1,3}\.){3}[0-9]{1,3}"`

Örneğin:

admin@node1:~> sudo ntpdate -p 2 -d 123.x.xx.xx
10 Mar 11:06:15 ntpdate[69998]: ntpdate 4.2.8p15@1.3728-o Thu Jun 25 14:17:29 UTC 2020 (1)
Looking for host 123.x.xx.xx and service ntp
123.x.xx.xx reversed to <NTP hostname>
host found : <NTP hostname>
transmit(123.x.xx.xx)
transmit(123.x.xx.xx)
123.x.xx.xx: Server dropped: no data

10 Mar 11:06:19 ntpdate[69998]: no server suitable for synchronization found


Birkaç saniye bekleyin ve ardından aynı komutu tekrar çalıştırın:

admin@node1:~> sudo ntpdate -p 2 -d 123.x.xx.xx
10 Mar 11:06:24 ntpdate[70526]: ntpdate 4.2.8p15@1.3728-o Thu Jun 25 14:17:29 UTC 2020 (1)
Looking for host 123.x.xx.xx and service ntp
123.x.xx.xx reversed to <NTP hostname>
host found : <NTP hostname>
transmit(123.x.xx.xx)
receive(123.x.xx.xx)
transmit(123.x.xx.xx)
receive(123.x.xx.xx)

server 123.x.xx.xx, port 123
stratum 1, precision -29, leap 00, trust 000
refid [NIST], root delay 0.000244, root dispersion 0.000488
reference time:      e7b58d80.00000000  Fri, Mar 10 2023 11:05:36.000
originate timestamp: e7b58db2.9661f6d5  Fri, Mar 10 2023 11:06:26.587
transmit timestamp:  e7b58db2.89fd47bf  Fri, Mar 10 2023 11:06:26.539
filter delay:  0.13205    0.13127    ----       ----
               ----       ----       ----       ----
filter offset: -0.004465  -0.004421  ----       ----
               ----       ----       ----       ----
delay 0.13127, dispersion 0.00002, offset -0.004421

10 Mar 11:06:26 ntpdate[70526]: adjust time server 123.x.xx.xx offset -0.004421 sec

Cause

NTP sunucusunun NTP istekleri için bir hız sınırlaması vardır. 
NTP Sunucusunun hız sınırı varken xDoctor tüm Düğümleri aynı anda senkronize etmeye çalıştığında yalnızca ilk Düğüme yanıt verir.
xDoctor, tüm istekleri aralarında bir gecikme olmadan gönderir, bu nedenle sunucudan engellenirler.

Resolution

xDoctor Ekibi, bunun gelecekteki bir xDoctor sürümünde ele alınacağını onaylamıştır. (Geçerli sürüm: 4.8-89.0)
İstek Bilgileri: xDoctor denetimi çalıştırmadığında yanlış pozitiflere neden olan NTP hız sınırlamasını önlemek için ntpdate komutlarını yenidenazaltın.

Additional Information

Affected Products

ECS, ECS Appliance, ECS Appliance Gen 1, ECS Appliance Gen 2, ECS Appliance Gen 3, ECS Appliance Hardware Series, ECS Appliance Software with Encryption, ECS Appliance Software without Encryption
Article Properties
Article Number: 000210976
Article Type: Solution
Last Modified: 21 Nov 2025
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.