Avamar: Cannot select /REPLICATE when running backend capacity report (v7.0 through 7.5)
Summary: Avamar Administrator does not allow /REPLICATE to be selected when running backend capacity report (v7.0 through 7.5).
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
The backend report is being configured through the Avamar Administrator interface.
We must choose which domains and clients should be in the report.
The expected domains are shown, but the /REPLICATE domain is not visible.
Specifying /REPLICATE when calling the backend report from the Avamar command-line results in no meaningful data is produced. Example output is shown below.
We must choose which domains and clients should be in the report.
The expected domains are shown, but the /REPLICATE domain is not visible.
Specifying /REPLICATE when calling the backend report from the Avamar command-line results in no meaningful data is produced. Example output is shown below.
nohup backendreport --include=/REPLICATE/sourceavamar.domain.com/domain/testclient.domain.com --avtar=--clearcache --avtar=--hashcachemax=-10 --small-client-mb=0 --verbose > backendreport-repl.out &
[1] 10074
admin@utility:~/working/>: tail -f backendreport-repl.out
Changing working directory to /tmp/replicate
INFO: Inclusion patterns are: "/REPLICATE/sourceavamar.domain.com/domain/testclient.domain.com"
avmgr logn
1 Request succeeded
-1 privilege level (enabled,create,read,backup,access,move,delete,maint,manage,fullmanage,noticketrequired,
superuser,ignoreacls,readdir,mclogin,opt1,opt2)
2 block type (directory)
avmgr cpdb --path=/ --mvpath=/REPLICATE/ --out=replnew.sh --avmgr-path=avmgr --failover
--list-snapups
Script "replnew.sh" for target path /REPLICATE copies 36 users in 115 accounts (81 clients)
Accounting changes: 0 differences
DONE Replicate to successful, elapsed 0000:00:08 (Wed Jan 22 09:42:18 GMT 2014)
<backendreport version="6.1.2-46" reporttime="2014/01/22-09:42:18" bytessent="0" totaltime="0">
</backendreport>
completed backendreport (pid=10074)
============================== Finished backendreport
Cause
The backend report uses a standard root-to-replicate replication process to calculate its results.
Standard replication is intended to take a regular domain as its srcpath and not the /REPLICATE domain,
The backend capacity report does not accept a path containing the /REPLICATE domain.
Standard replication is intended to take a regular domain as its srcpath and not the /REPLICATE domain,
The backend capacity report does not accept a path containing the /REPLICATE domain.
Resolution
The Avamar Administrator UI does not allow /REPLICATE domain to be selected for reporting purposes.
The backend report must be run on the source Avamar Administrator UI against clients under the / (root) domain.
Workaround:
It is possible to run the backend report against the /REPLICATE domain of an Avamar server by running it from the command line. See Avamar - How to run a backend capacity report on the /REPLICATE domain.
The backend report must be run on the source Avamar Administrator UI against clients under the / (root) domain.
Workaround:
It is possible to run the backend report against the /REPLICATE domain of an Avamar server by running it from the command line. See Avamar - How to run a backend capacity report on the /REPLICATE domain.
Article Properties
Article Number: 000046225
Article Type: Solution
Last Modified: 10 Feb 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.