UI Drive Map Image Support in iDRAC9 for PowerEdge 14G, 15G, and 16G Platforms

Summary: UI drive map image Support in iDRAC9 for Dell PowerEdge 14G, 15G, and 16G platforms

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

For the below mentioned Dell PowerEdge platforms (14G, 15G, and 16G), if the user goes to the Storage > Overview > Summary page in the iDRAC9 UI, the System Status is displayed. Here you can see the Enclosure Backplane Front location along with slots along with the status of the slots displayed on the svg image.
 

Model Slot FormFactor
R640 4 3.5
  8 2.5
  10 2.5
R650 4 3.5
  8 (SAS and SATA) 2.5
  8 (NVMe) 2.5
  10 2.5
R740 8 2.5
  16 2.5
  8 3.5
R740xd 12 3.5
  24 2.5
R750 24 2.5
  16 2.5
  8 2.5
  12 3.5
R7525 24 2.5
  16 2.5
  8 2.5
  12 3.5
  8 3.5
R760xd2 12 3.5
R660 4 3.5
  8 (SAS and SATA) 2.5
  8 (NVMe) 2.5
  10 2.5
  14 EDSFF
  16 EDSFF
R760 8 3.5
  8 2.5
  12 3.5
  16 2.5
  16 EDSFF
  16 (NVMe) EDSFF
  24 2.5
R7625 24 2.5
R7515 8 3.5
  12 3.5
  24 2.5
R650xs 10 2.5
R740xd2 12 3.5
R750xa 6 2.5
  8 2.5
R750xs 12 3.5
  24 2.5
R6525 4 3.5
  8 2.5
  10 2.5
R7415 24 2.5
R7425 8 3.5
  12 3.5
  24 2.5
R6415 4 3.5
  8 2.5
  10 2.5
     

Cause

Not required

Resolution

For platforms that are not listed in the above table, this above-mentioned System Status display is not seen in the UI. 

Example from a supported platform: 

screenshot of supported drive map

Example from an unsupported platform: 

screenshot of unsupported model for drive map

Affected Products

iDRAC9 - 4.xx Series, iDRAC9 - 5.xx Series, iDRAC9 - 6.xx Series, iDRAC9 - 7.xx Series, PowerEdge R650xs
Article Properties
Article Number: 000363882
Article Type: Solution
Last Modified: 02 Dec 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.