OptiPlex 3050: Teardown Removal Guide Index
Summary: This is an index page to the part removal guides available for the various models of the OptiPlex 3050 series.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
These guides take you through each step of the safe removal of the Customer Replaceable Unit (CRU) parts of the various OptiPlex 3050 System Type systems. (CRUs are the parts of the system that should not require a Customer Support engineer to remove or replace.)
The guides also include screenshots to reference what is involved.
Table of Contents:
- Removal Guide Introduction
- The Mini Tower (MT) Chassis
- The Small Form Factor (SFF) Chassis
- The Micro Form Factor (MFF) Chassis
Cause
Not required
Resolution
If these guides do not cover what you are looking to do, reference your System Manual.
Back to Top
The Small Form Factor (SFF) Chassis
- KB article 136838, OptiPlex 3050 Small Form Factor (SFF) Teardown or Removal guide for customer replaceable units (CRUs)
The Micro Form Factor (MFF) Chassis
- KB article 136850, OptiPlex 3050 Micro Form Factor (MFF) Teardown/Removal guide for customer replaceable units (CRUs)
- KB article 136893, Micro Form Factor Mounting Options and installation methods
If you require further assistance, contact Dell Technical Support.
Affected Products
OptiPlex 3050 Tower, OptiPlex 3050 Micro, OptiPlex 3050 Small Form FactorArticle Properties
Article Number: 000123868
Article Type: Solution
Last Modified: 26 Sep 2023
Version: 10
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.