Expand the links to view information about servers, chassis, networking devices, VxRail, agents, hypervisors, OSs, and plug-ins supported by OpenManage Enterprise 4.0.x.
Show all | Hide all
This section provides recommended hardware requirements for OpenManage Enterprise appliances running with and without plugins in small and large deployments. For more information about plug-in hardware requirements, see the User's Guide of the respective OpenManage Enterprise plug-ins available on the support site.
Maximum recommended hardware configuration
Starting from the OpenManage Enterprise 4.0 version, the OpenManage Enterprise appliance is shipped with the maximum recommended hardware requirements to provide you with a hassle-free deployment and installation of the appliance and plug-ins respectively. However, if your environment does not require the maximum hardware configuration, see "Manage memory and CPU requirements based on deployment size" section in this Support Matrix to determine the appropriate hardware resources required for your specific requirements. The following table lists recommended hardware requirements for installing OpenManage Enterprise and all its plug-ins:
Table 1: Maximum recommended hardware configuration
| Hardware configuration |
Recommended configuration |
| RAM |
64 GB |
| Processor cores |
8 |
| Storage space |
830 GB* |
- *OpenManage Enterprise appliance is configured with two VDs, each with an initial storage space of 415 GB. The primary VD is leveraged for the core application and database while the secondary VD is required for additional features and supporting plug-ins. However, even without the secondary VDs selected during deployment, the appliance can still boot up for TUI configuration using only the primary VHDX.
- *Ensure that your hypervisor storage has enough free space to support the recommended virtual disk size of the appliance, and enough overhead to support snapshots and future expansion of the virtual disk.
- *Ensure that the primary disk and the secondary disk are identical in size always.
Manage memory and CPU requirements based on deployment size
If your environment does not require the generic maximum hardware configuration, use the following table to determine the appropriate hardware resources required for your specific requirements such as large-scale or small-scale deployments:
Table 2: Large deployment—Number of managed devices is between 1,000 and 8,000.
| OpenManage Enterprise appliance and plug-ins |
Minimum RAM* |
Minimum Cores |
| OpenManage Enterprise |
32 GB |
8 |
| Additional requirements for each plug-in |
|
| CloudIQ plug-in (Default plug-in) |
+4 GB |
8 |
| Services (Default plug-in) |
+8 GB |
8 |
| Power Manager |
+8 GB |
8 |
| Update Manager |
+1 GB |
8 |
| OpenManage Enterprise Integration for VMware vCenter (OMEVV) |
+5 GB |
8 |
| Operations Manager (Integration for Microsoft SCOM) |
+3 GB |
8 |
| VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM) |
+1 GB |
8 |
| Total recommended hardware configuration with all plug-ins installed |
64 GB |
8 |
*Note: If you want to migrate from an OpenManage Enterprise 3.10.x appliance to a later version, while deploying the OpenManage Enterprise 4.0.x version, ensure that you allocate the minimum required memory (required for the migration of both OpenManage Enterprise and its plug-ins from 3.10.x) even if you plan to decline the installation of default plug-ins during the migration process. Else, migration will not be allowed.
Table 3: Small deployment—Number of managed devices is less than 1,000.
| OpenManage Enterprise appliance and plug-ins |
Minimum RAM* |
Minimum Cores |
| OpenManage Enterprise |
16 GB |
4 |
| Additional requirements for each plug-in |
|
| CloudIQ plug-in (Default plug-in) |
+2 GB |
4 |
| Services (Default plug-in) |
+8 GB |
4 |
| Power Manager |
+3 GB |
4 |
| Update Manager |
+1 GB |
4 |
| OpenManage Enterprise Integration for VMware vCenter (OMEVV) |
+5 GB |
4 |
| Operations Manager (Integration for Microsoft SCOM) |
+3 GB |
4 |
| VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM) |
+1 GB |
4 |
| Total recommended hardware configuration with all plug-ins installed |
40 GB |
4 |
*Note: If you want to migrate from an OpenManage Enterprise 3.10.x appliance to a later version, while deploying the OpenManage Enterprise 4.0.x version, ensure that you allocate the minimum required memory (required for the migration of both OpenManage Enterprise and its plug-ins from 3.10.x) even if you plan to decline the installation of default plug-ins during the migration process. Else, migration will not be allowed.
Lists of the supported plug-ins that can be enabled for additional OpenManage Enterprise monitoring and management capabilities.
Table 4: Plug-ins supported by OME 4.0 and OME 4.0.1
| Plug-in |
Supported Versions |
Description |
| Power Manager |
3.2 |
Enables PowerEdge servers' power management and allows administrators to view, measure, and control server power consumption |
| OpenManage Enterprise Services (Default plug-in) |
4.0 |
Enables proactive and predictive monitoring and management support for devices with ProSupport and ProSupport Plus entitlements |
| Update Manager |
1.5 |
Enables administrators to create and manage repositories for PowerEdge devices with iDRAC or Windows that are managed in OpenManage Enterprise |
| CloudIQ Plugin (Default plug-in) |
2.0 |
Enables administrators to register with the Dell CloudIQ, select the device groups for data transfer to CloudIQ for proactive monitoring and measurement of the overall health of the selected devices. |
| OpenManage Enterprise Integration for VMware vCenter (OMEVV) |
1.3 |
Enables streamlining the management processes in your data center environment by allowing you to use VMware vCenter Server to manage your full server infrastructure - both physical and virtual |
| VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM) |
1.2 |
Enables you to add the Microsoft System Center Configuration Manager (MCM) and System Center Virtual Machine Manager (SCVMM) consoles to OpenManage Enterprise After synchronizing devices, you can install Microsoft Windows OS on PowerEdge servers using an OpenManage Enterprise Advanced+ license. Using the Cluster-Aware Updating feature, you can update the firmware and drivers on the SCVMM-managed cluster nodes. |
| Operations Manager |
1.1 |
Enables the monitoring of the Dell hardware assets that are discovered in OpenManage Enterprise using the System Center Operations Manager (SCOM) console. |
Note: Plug-ins released with OpenManage Enterprise 4.0.x are not compatible with OpenManage Enterprise versions 3.10.x or earlier.
Supported devices, VxRail, agents, hypervisors, and OSs
Note: An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
Table 5: PowerEdge 16G servers supported by OME 4.0 and OME 4.0.1
| PowerEdge servers |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge R7625 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R760 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R760XS |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R660 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R660XS |
Yes |
Yes |
Yes |
Yes |
| PowerEdge MX760c |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R6625 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R6615 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R7625 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R7615 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R860 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R960 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R760xa |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R760xd2 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T560 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T360 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R360 |
Yes |
Yes |
Yes |
Yes |
Table 6: PowerEdge 15G servers supported by OME 4.0 and OME 4.0.1
| PowerEdge servers |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge R6515 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R6525 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R7515 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R7525 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R650 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R750 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R750xa |
Yes |
Yes |
Yes |
Yes |
| PowerEdge MX750c |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R450 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R550 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R650xs |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R750xs |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T350 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T150 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T550 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R250 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R350 |
Yes |
Yes |
Yes |
Yes |
Table 7: PowerEdge 14G servers supported by OME 4.0 and OME 4.0.1
| PowerEdge servers |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge M640 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R240 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R340 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R440 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R540 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R640 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R6415 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R740 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R740xd |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R740xd2 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R7415 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R7425 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R840 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R940 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R940XA |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T140 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T340 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T440 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T640 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge FC640 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge MX740c |
Yes |
Yes |
Yes |
Yes |
| PowerEdge MX840c |
Yes |
Yes |
Yes |
Yes |
Table 8: PowerEdge 13G servers supported by OME 4.0 and OME 4.0.1
| PowerEdge servers |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge M630 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R830 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T130 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T330 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T430 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge T630 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R230 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R330 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R430 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R530 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R530xd |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R630 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R730 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R730xd |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R830 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge R930 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge FC430 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge FC630 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge FC830 |
Yes |
Yes |
Yes |
Yes |
Note: OpenManage Enterprise 4.0 and later versions do not support PowerEdge 12G servers.
Note: An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
Table 9: PowerEdge C series servers supported by OME 4.0 and OME 4.0.1
| PowerEdge servers |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge C4130 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge C4410 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge C6320 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge C6320p |
Yes |
Yes |
Yes |
Yes |
| PowerEdge C6420 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge C6525 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge C6520 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge C6620 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge C6615 |
Yes |
Yes |
Yes |
Yes |
Note: A double asterisk (**) indicates that while OpenManage Enterprise does not support the update of firmware, AX nodes are still included when generating update compliance reports.
Table 10: PowerEdge AX Node series servers supported by OME 4.0 and OME 4.0.1
| AX node |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware ** |
Managing device configurations and deployment |
| AX-640 |
Yes |
Yes |
No |
Yes |
| AX-650 |
Yes |
Yes |
No |
Yes |
| AX-6515 |
Yes |
Yes |
No |
Yes |
| AX-740XD |
Yes |
Yes |
No |
Yes |
| AX-750 |
Yes |
Yes |
No |
Yes |
| AX0-7525 |
Yes |
Yes |
No |
Yes |
Note: OpenManage Enterprise does not support the OEM MX7000 chassis.
Dell OEM devices (rebranded or de-branded PowerEdge servers), when discovered, are classified under System Groups > All Devices > Servers > OEM Servers on the All Devices page. If both the server and DRAC of the OEM device are discovered, they are correlated and displayed as one device under the OEM Devices group. Most of the functionality available to the PowerEdge servers—such as tasks, reports, and filters—are also available to the PowerEdge OEM servers. However, a system update may not be possible if it is not supported by the OEM device module.
Note: The SATADOM-specific information is not displayed in the device inventory of OpenManage Enterprise.
Note: An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
Table 11: PowerEdge XC series supported by OME 4.0 and OME 4.0.1
| XC Series Web-Scale converged appliances |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| XC6320-6 |
Yes |
Yes |
No |
No |
| XC6320-6AF |
Yes |
Yes |
No |
No |
| XC430 Xpress |
Yes |
Yes |
No |
No |
| XC430-4 |
Yes |
Yes |
No |
No |
| XC430-8 |
Yes |
Yes |
No |
No |
| XC450 |
Yes |
Yes |
No |
No |
| XC630-10 |
Yes |
Yes |
No |
No |
| XC630-10AF |
Yes |
Yes |
No |
No |
| XC630-10P |
Yes |
Yes |
No |
No |
| XC640 |
Yes |
Yes |
No |
No |
| XC650 |
Yes |
Yes |
No |
No |
| XC730-16G |
Yes |
Yes |
No |
No |
| XC730xd-12 |
Yes |
Yes |
No |
No |
| XC730xd-12C |
Yes |
Yes |
No |
No |
| XC730xd-12R |
Yes |
Yes |
No |
No |
| XC730xd-12S |
Yes |
Yes |
No |
No |
| XC730xd-24 |
Yes |
Yes |
No |
No |
| XC730xd-24S |
Yes |
Yes |
No |
No |
| XC740xd |
Yes |
Yes |
No |
No |
| XC750 |
Yes |
Yes |
No |
No |
| XC750xa |
Yes |
Yes |
No |
No |
| XC6420 |
Yes |
Yes |
No |
No |
| XC6400 |
Yes |
Yes |
No |
No |
| XC940 |
Yes |
Yes |
No |
No |
| XC640ENT XC Core |
Yes |
Yes |
No |
No |
| XC740xdENT XC Core |
Yes |
Yes |
No |
No |
| XC940ENT XC Core |
Yes |
Yes |
No |
No |
| XC6420ENT XC Core |
Yes |
Yes |
No |
No |
| XC6400 ENCLOSURE XC Core |
Yes |
Yes |
No |
No |
| XC6515 |
Yes |
Yes |
No |
No |
| XC6520 |
Yes |
Yes |
No |
No |
| XC7525 |
Yes |
Yes |
No |
No |
| XCXR2 Core |
Yes |
Yes |
No |
No |
| XC740xd2 Core |
Yes |
Yes |
No |
No |
| XC940 |
Yes |
Yes |
No |
No |
| XC660-10* |
Yes |
Yes |
No |
No |
| XC660-12N* |
Yes |
Yes |
No |
No |
| XC660xs-4* |
Yes |
Yes |
No |
No |
| XC7625-14* |
Yes |
Yes |
No |
No |
| XC7625-24* |
Yes |
Yes |
No |
No |
Table 12: PowerEdge XE series supported by OME 4.0 and OME 4.0.1
| XE Series devices |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge XE2420 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XE7420 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XE7440 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XE8545 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XE9680 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XE8640 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XE9640 |
Yes |
Yes |
Yes |
Yes |
Note: An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
Table 13: PowerEdge XR series supported by OME 4.0 and OME 4.0.1
| XR Series devices |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge XR2 |
Yes |
Yes |
No |
Yes |
| PowerEdge XR11 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XR12 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XR4510c |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XR4520c |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XR7620 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XR5610 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XR8620t |
Yes |
Yes |
Yes |
Yes |
| PowerEdge XR8610t* |
Yes |
Yes |
Yes |
Yes |
Note: OpenManage Enterprise 4.0 and later versions do not support the PowerEdge M1000e Chassis.
Table 14: Chassis supported by OME 4.0 and OME 4.0.1
| PowerEdge Chassis devices |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge MX7000 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge VRTX |
Yes |
Yes |
Yes |
No |
| PowerEdge FX2 |
Yes |
Yes |
Yes |
No |
| PowerEdge FX2s |
Yes |
Yes |
Yes |
No |
Lists of the chassis and the input/output aggregators which support IOA template deployment.
Note: OpenManage Enterprise 4.0 and later versions do not support the PowerEdge M1000e Chassis.
Table 15: IOAs which are supported by OME 4.0 and OME 4.0.1.
| PowerEdge Chassis devices |
Supported IOAs |
Managing device configurations and deployment |
Dell Networking OS version |
| PowerEdge FX2s |
FN2210S |
Yes |
OS9 |
| PowerEdge FX2s |
FN410S |
Yes |
OS9 |
| PowerEdge FX2s |
FN410T |
Yes |
OS9 |
Lists of the supported Dell VxRail hyperconverged appliances.
Note: An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
Table 16: VxRail appliances supported by OME 4.0 and OME 4.0.1
| VxRail Hyperconverged appliances |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| VxRail D560 |
Yes |
Yes |
No |
No |
| VxRail D560F |
Yes |
Yes |
No |
No |
| VxRail E460 |
Yes |
Yes |
No |
No |
| VxRail E460F |
Yes |
Yes |
No |
No |
| VxRail E560 |
Yes |
Yes |
No |
No |
| VxRail E560F |
Yes |
Yes |
No |
No |
| VxRail E560N |
Yes |
Yes |
No |
No |
| VxRail E660N |
Yes |
Yes |
No |
No |
| VxRail E660 |
Yes |
Yes |
No |
No |
| VxRail E660F |
Yes |
Yes |
No |
No |
| VxRail E665 |
Yes |
Yes |
No |
No |
| VxRail E665N |
Yes |
Yes |
No |
No |
| VxRail G560 |
Yes |
Yes |
No |
No |
| VxRail G560F |
Yes |
Yes |
No |
No |
| VxRail P470 |
Yes |
Yes |
No |
No |
| VxRail P470F |
Yes |
Yes |
No |
No |
| VxRail P470N |
Yes |
Yes |
No |
No |
| VxRail P570 |
Yes |
Yes |
No |
No |
| VxRail P570F |
Yes |
Yes |
No |
No |
| VxRail P580N |
Yes |
Yes |
No |
No |
| VxRail 6470F |
Yes |
Yes |
No |
No |
| VxRail V670F |
Yes |
Yes |
No |
No |
| VxRail S670 |
Yes |
Yes |
No |
No |
| VxRail P670N |
Yes |
Yes |
No |
No |
| VxRail P675F |
Yes |
Yes |
No |
No |
| VxRail P675N |
Yes |
Yes |
No |
No |
| VxRail S470 |
Yes |
Yes |
No |
No |
| VxRail S570 |
Yes |
Yes |
No |
No |
| VxRail V470 |
Yes |
Yes |
No |
No |
| VxRail V470F |
Yes |
Yes |
No |
No |
| VxRail V570 |
Yes |
Yes |
No |
No |
| VxRail V570F |
Yes |
Yes |
No |
No |
| VxRail VD-4510c* |
Yes |
Yes |
No |
No |
| VxRail VD-4520c* |
Yes |
Yes |
No |
No |
| VxRail VE-660* |
Yes |
Yes |
No |
No |
| VxRail VP-760* |
Yes |
Yes |
No |
No |
Table 17: PowerEdge HS Series supported by OME 4.0 and OME 4.0.1.
| PowerEdge servers |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge HS5610 |
Yes |
Yes |
Yes |
Yes |
| PowerEdge HS5620 |
Yes |
Yes |
Yes |
Yes |
Table 18: Storage modules by OME 4.0 and OME 4.0.1
| Storage module |
Inventory |
Monitoring health |
Managing device firmware |
Managing device configurations and deployment |
| PowerEdge FD332 |
Yes |
Yes |
No |
No |
| PowerEdge MX5016S |
Yes |
Yes |
Yes |
No |
The following table lists the supported Dell Storage devices—previously Dell Compellent devices.
Table 19: Storage (Dell Compellent) modules by OME 4.0 and OME 4.0.1
| Storage devices |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| FS8600 version 6 |
Yes |
Yes |
No |
No |
| SC4020 |
Yes |
Yes |
No |
No |
| SC7020 |
Yes |
Yes |
No |
No |
| SC8000 |
Yes |
Yes |
No |
No |
| SCv3000 |
Yes |
Yes |
No |
No |
| SC9000 |
Yes |
Yes |
No |
No |
| SC5020 |
Yes |
Yes |
No |
No |
| SCv3020 |
Yes |
Yes |
No |
No |
| SC3020 version 7.5.1 |
Yes |
Yes |
No |
No |
Table 20: PowerVault MD series services supported by OME 4.0 and OME 4.0.1
| Storage devices |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| MD3220 |
Yes |
Yes |
No |
No |
| MD3200 |
Yes |
Yes |
No |
No |
| MD3200i |
Yes |
Yes |
No |
No |
| MD3800f |
Yes |
Yes |
No |
No |
| MD3820f |
Yes |
Yes |
No |
No |
| MD3860f |
Yes |
Yes |
No |
No |
| MD3800i |
Yes |
Yes |
No |
No |
| MD3820i |
Yes |
Yes |
No |
No |
| MD3400 |
Yes |
Yes |
No |
No |
| MD3420 |
Yes |
Yes |
No |
No |
| MD3460 |
Yes |
Yes |
No |
No |
| MD3060e |
Yes |
Yes |
No |
No |
Table 21: PowerVault ME4 series devices supported by OME 4.0 and OME 4.0.1
| Storage devices |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| ME4012 |
Yes |
Yes |
No |
No |
| ME4024 |
Yes |
Yes |
No |
No |
| ME4084 (not in the JBOD mode) |
Yes |
Yes |
No |
No |
Table 22: PowerVault ME5 series devices supported by OME 4.0 and OME 4.0.1
| Storage devices |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| ME5084 |
Yes |
Yes |
No |
No |
| ME5024 |
Yes |
Yes |
No |
No |
| ME5012 |
Yes |
Yes |
No |
No |
Table 23: PowerVault NX series devices supported by OME 4.0 and OME 4.0.1
| Storage devices |
Discovery and Inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
| NX3340 |
Yes |
Yes |
No |
No |
| NX3240 |
Yes |
Yes |
No |
No |
Note: A double asterisk (**) indicates that the relevant operation takes place during the corresponding chassis operation.
Table 24: Network devices supported by OME 4.0 and OME 4.0.1
| Networking devices |
Discovery and inventory |
Monitoring and device alerts |
Managing device firmware |
Managing device configurations and deployment |
Dell networking minimum OS version |
| MX5108N |
Yes** |
Yes** |
Yes |
Yes |
OS10 |
| MX7116N |
Yes** |
Yes** |
No |
No |
Managed using Modular Edition. |
| MX9116N |
Yes** |
Yes** |
No |
No |
OS10 |
| MXG610S |
Yes** |
Yes** |
No |
No |
Managed using Modular Edition. |
| MXL 10/40GbE |
Yes** |
Yes** |
No |
No |
OS9 |
| N3248TE |
Yes |
Yes |
No |
No |
OS10.5.2.0 |
| S3048-ON |
Yes |
Yes |
No |
No |
OS9 |
| S4048-ON |
Yes |
Yes |
No |
No |
OS9 |
| S4112F-ON |
Yes |
Yes |
No |
No |
OS10 |
| S4112T-ON |
Yes |
Yes |
No |
No |
OS10 |
| S4128F-ON |
Yes |
Yes |
No |
No |
OS10 |
| S4128T-ON |
Yes |
Yes |
No |
No |
OS10 |
| S4148F-ON |
Yes |
Yes |
No |
No |
OS10 |
| S4148FE-ON |
Yes |
Yes |
No |
No |
OS10 |
| S4148T-ON |
Yes |
Yes |
No |
No |
OS10 |
| S4148U-ON |
Yes |
Yes |
No |
No |
OS10 |
| S4248FB |
Yes |
Yes |
No |
No |
OS10.5.2.0 |
| S4248FB-ON |
Yes |
Yes |
No |
No |
OS10 |
| S4248FBL-ON |
Yes |
Yes |
No |
No |
OS10 |
| S5148F-ON |
Yes |
Yes |
No |
No |
OS10 |
| S5212F-ON |
Yes |
Yes |
No |
No |
OS10 |
| S5224F-ON |
Yes |
Yes |
No |
No |
OS10 |
| S5232F |
Yes |
Yes |
No |
No |
OS10 |
| S5232 |
Yes** |
Yes** |
No |
No |
OS10 |
| S5248 |
Yes** |
Yes** |
No |
No |
OS10 |
| S5248F-ON |
Yes |
Yes |
No |
No |
OS10 |
| S5296F-ON |
Yes |
Yes |
No |
No |
OS10 |
| S5296F |
Yes |
Yes |
No |
No |
OS10.5.2.0 |
| S5448 |
Yes** |
Yes** |
No |
No |
OS10.5.2.0 |
| S6010 |
Yes |
Yes |
No |
No |
OS10.5.2.0 |
| S6010-ON |
Yes |
Yes |
No |
No |
OS10 |
| S6100-ON |
Yes |
Yes |
No |
No |
OS9 |
| Z9100 |
Yes |
Yes |
No |
No |
OS10.5.2.0 |
| Z9100-ON |
Yes |
Yes |
No |
No |
OS9 |
| Z9264F |
Yes |
Yes |
No |
No |
OS10.5.2.0 |
| Z9264F-ON |
Yes |
Yes |
No |
No |
OS10 |
| Z9332F |
Yes |
Yes |
No |
No |
OS10 |
| Z9432 |
Yes** |
Yes** |
No |
No |
OS10 |
| C9010 |
Yes |
Yes |
No |
No |
OS9.14.2.8 |
| C1048 |
Yes |
Yes |
No |
No |
OS9.14.2.8 |
Lists of the Dell system agents and interfaces that are supported in this version of OpenManage Enterprise.
Table 25: Agents and interfaces supported by OME 4.0 and OME 4.0.1
| Agent or interface |
Supported version |
| Dell Chassis Management Controller (CMC) |
- PowerEdge VRTX chassis—3.21 and later versions.
- PowerEdge FX2 and FX2s sleds—2.21 and later versions.
|
| Dell OpenManage Enterprise Modular Edition |
For the PowerEdge MX7000 chassis—1.2 and later versions. |
| iDRAC9 |
- PowerEdge 14G servers: iDRAC 3.xx series and later versions.
- PowerEdge 15G and 16G servers: iDRAC 6.xx series and later versions.
All 14G, 15G, and 16G PowerEdge servers: iDRAC 5.10.xx.xx and later versions |
| iDRAC8 |
- For the13G PowerEdge servers with iDRAC8 — 2.70.xx.xx and later versions.
Note: Ensure that Express or Enterprise licenses are available to perform firmware updates.
|
| Dell Repository Manager |
3.0 and later versions. |
| Networking OS |
OS9 and later versions, except for:
- Dell Networking Z9000 — 9.7P19 and later versions.
- Networking OS switches MX5108N, MX9116N—minimum firmware version 10.5 (OS 10).
Note: For a complete list of supported networking devices, see Networking device support in this KB article.
|
| HPE iLO Remote Server Management Software |
BMC firmware version iLO 5 and later. |
| Lenovo XClarity Controller |
BMC firmware version 1.00 and later. |
Lists of the hypervisors that are supported on management stations.
Table 26: Hypervisors supported by OME 4.0 and OME 4.0.1
| Hypervisor |
Supported version |
| VMware vSphere support |
- vSphere ESXi 6.7
- vSphere ESXi 6.7 U1
- vSphere ESXi 6.7 U3
- vSphere ESXi 7.0
- vSphere ESXi 7.0 U1
- vSphere ESXi 7.0 U2
- vSphere ESXi 7.0 U3
- vSphere ESXi 8.0
- vSphere ESXi 8.0 U1*
- vSphere ESXi 8.0 U2*
|
| Microsoft Hyper-V support on Windows Server |
- Windows Server 2019
- Windows Server 2022
|
| KVM support on Red Hat Linux |
- Red Hat Enterprise Linux 6.5
- Red Hat Enterprise Linux 7.0
- Red Hat Enterprise Linux 7.2
- Red Hat Enterprise Linux 7.6
- Red Hat Enterprise Linux 7.7
- Red Hat Enterprise Linux 8.0
- Red Hat Enterprise Linux 8.1
- Red Hat Enterprise Linux 8.2
- Red Hat Enterprise Linux 8.3
- Red Hat Enterprise Linux 8.4
- Red Hat Enterprise Linux 8.5
- Red Hat Enterprise Linux 8.6
- Red Hat Enterprise Linux 8.7
- Red Hat Enterprise Linux 8.8
- Red Hat Enterprise Linux 9.0
- Red Hat Enterprise Linux 9.1
- Red Hat Enterprise Linux 9.2
|
Lists of the supported operating systems on the managed devices for in-band device management.
Table 27: Operating systems supported by OME 4.0 and OME 4.0.1
| Operating systems |
Discovery and inventory |
Device alerts |
Managing device configurations and deployment |
Driver update |
| Windows Server 2019 |
Yes |
Yes |
No |
Yes |
| Windows Server 2022 |
Yes |
Yes |
No |
Yes |
| Azure Stack HCI |
Yes |
Yes |
No |
No |
| Azure Stack HCI V1 |
Yes |
Yes |
No |
No |
| Azure StackI HCI V2 |
Yes |
Yes |
No |
No |
| ESXi 7.0 |
Yes |
Yes |
No |
No |
| ESXi 7.0 U1 |
Yes |
Yes |
No |
No |
| ESXi 7.0 U2 |
Yes |
Yes |
No |
No |
| ESXi 7.0 U3 |
Yes |
Yes |
No |
No |
| ESXi 6.7 U3 |
Yes |
Yes |
No |
No |
| ESXi 8.0 |
Yes |
Yes |
No |
No |
| ESXi 8.0 U1 |
Yes |
Yes |
No |
No |
| ESXi 8.0 U2 |
Yes |
Yes |
No |
No |
| RHEL 7.8 |
Yes |
Yes |
No |
No |
| RHEL 7.9 |
Yes |
Yes |
No |
No |
| RHEL 8.1 |
Yes |
Yes |
No |
No |
| RHEL 8.2 |
Yes |
Yes |
No |
No |
| RHEL 8.3 |
Yes |
Yes |
No |
No |
| RHEL 8.4 |
Yes |
Yes |
No |
No |
| RHEL 8.5 |
Yes |
Yes |
No |
No |
| RHEL 8.6 |
Yes |
Yes |
No |
No |
| RHEL 8.7 |
Yes |
Yes |
No |
No |
| RHEL 8.8 |
Yes |
Yes |
No |
No |
| RHEL 9.0 |
Yes |
Yes |
No |
No |
| RHEL 9.1 |
Yes |
Yes |
No |
No |
| RHEL 9.2 |
Yes |
Yes |
No |
No |
| Ubuntu 18.04.4 |
Yes |
Yes |
No |
No |
| Ubuntu 20.04.4 |
Yes |
Yes |
No |
No |
| Ubuntu 22.04.4 |
Yes |
Yes |
No |
No |
| SLES 15 SP2 |
Yes |
Yes |
No |
No |
| SLES 15 SP4 |
Yes |
Yes |
No |
No |
Table 28: Browsers supported by OME 4.0 and OME 4.0.1
| Browser |
Supported version |
| Microsoft Internet Explorer |
11 and later (64-bit) |
| Mozilla Firefox |
52 and later |
| Google Chrome |
58 and later |
| Microsoft Edge |
41.16299 and later |