How to reset the FlexFlash Controller on Cisco UCS B-Series Servers

Summary: How to reset the FlexFlash Controller on Cisco UCS B-Series Servers.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Supported B-Series Servers

Supported B-Series Servers
Follow below steps to reset the FlexFlash Controller on Cisco UCS B-Series Servers.
  1. Log in to the UCSM
  2. Select the Server in the Navigation Pane.
  3. Select Storage Tab in the viewing pane:
Storage Tab
  1. If the server has a FlexFlash Controller, you see a 'Reset FlexFlash Controller' link.
  2. Reset the FlexFlash controller:
FlexFlash controller
 

Affected Products

Servers
Article Properties
Article Number: 000204707
Article Type: How To
Last Modified: 15 Nov 2022
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.