DPE(Disk Processor Enclosure)를 교체한 후 IPMItool을 통해 Unity에 로그인하는 방법
Summary: Unity DPE(Disk Processor Enclosure)를 교체한 후 새 DPE의 일련 번호가 임시 일련 번호로 변경될 수 있습니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
일련 번호(SN)는 다음과 같습니다. temppsnt 를 설정하여 사용할 수 있습니다. IPMItool Unity에 대한 연결.
Dell SolVe 절차를 통해 DPE를 교체하면 원래 DPE SN이 새 DPE PROM에 추가됩니다. 이 temppsnt IPMItool용 SN은 필요하지 않습니다. 원래 SN이 대신 사용됩니다.
이 명령을 실행하여 IPMItool 이전 DPE의 SN 또는 새 DPE가 SP(Storage Processor)에 로그인할 수 없는 경우
ipmitool.exe -I lanplus -C 3 -U console -P temppsnt -H 128.221.1.252 sol activate ipmitool.exe -I lanplus -C 3 -U console -P temppsnt -H 128.221.1.253 sol activate
Affected Products
Dell EMC UnityArticle Properties
Article Number: 000314447
Article Type: How To
Last Modified: 25 Jun 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.